Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
3445 total products found.
Picture for TM0192-Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments-HD1998
Available for download

TM0192-HD1998-SG Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments-HD1998

Product Number: 21222-HD1998
ISBN: 1-57590-055-6
Author: NACE International
Publication Date: 1998
$179.00

This test method gives procedures to measure the effect on elastomeric materials subjected to rapid depressurization from elevated pressures in dry carbon dioxide environments…Historical Document 1998

 
Picture for TM0374-Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcuim Carbonate From Solution (For Oil and Gas Production Systems)-HD1990
Available for download

TM0374-1990, Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcuim Carbonate From Solution (For Oil and Gas Production Systems)

Product Number: 53023-HD1990
Author: Nace International
Publication Date: 1990
$179.00

Test methods designed to provide a relative and quantitative measure of the abilities of scale inhibitors to prevent the precipitation of solids, a necessary and critical stage in the formation of scale.  Historical Document 1990
Picture for Surface Preparation of Steel and Other Hard Materials by Water Blasting Prior to Coating or Recoating
Available for download

RP-01-72-HD1972-SG, Surface Preparation of Steel and Other Hard Materials by Water Blasting Prior to Coating or Recoating

Product Number: RP-01-72-HD1972
Author: NACE International
Publication Date: 1972
$179.00

Characteristics of water blasting methods. Equipment required. Operating procedures. Safety precautions and methods. Time requirement tables.  Classifications of items, structures  and surface conditions successfully cleaned.  Historical Document 1972

 
Picture for Examination Of IASCC In 304 Stainless Steel Core Shroud From A Commercial Boiling Water Reactor (BWR)
Available for download

Examination Of IASCC In 304 Stainless Steel Core Shroud From A Commercial Boiling Water Reactor (BWR)

Product Number: ED22-18366-SG
Author: Matthew Olszta, Karen Kruska, Danny Edwards, Daniel Schreiber, Peter Chou
Publication Date: 2022
$20.00

Nuclear reactors inherently operate under extreme environments, and hence the materials and alloys utilized for their design are required to withstand unique conditions. Not only do these materials need to stand up to corrosion at high temperatures, but also in certain components must they resist microstructural and physical property changes due to radiation. Two of the major effects of radiation on reactor alloys and radiation-induced segregation (RIS) and precipitation, which have been observed in reactor pressure vessel (RPV) steels, ferritic-martensitic steels, nickel base alloys, and austenitic stainless steels.
Picture for 96612 EFFECT OF OXYGEN ON THE INTERNAL
Available for download

96612 EFFECT OF OXYGEN ON THE INTERNAL CORROSION OF NATURAL GAS PIPELINES

Product Number: 51300-96612-SG
ISBN: 96612 1996 CP
Author: C.L. Durr, J.A. Beavers
$20.00
Picture for SSPC-TR 1-2004-NACE 6G194-2004

Thermal Pre-Cleaning

Product Number: SSPC-TR 1-2004-NACE 6G194-2004
Publication Date: 2004
$109.00
Picture for 01622 STATISTICAL METHOD FOR IDENTIFYING ACTIVE
Available for download

01622 STATISTICAL METHOD FOR IDENTIFYING ACTIVE CORROSION BASED ON DATA FROM MULTIPLE IN-LINE INSPECTION RUNS

Product Number: 51300-01622-SG
ISBN: 01622 2001 CP
Author: Dr. Steven W Rust and Elden R Johnson
$20.00
Prediction of Atmospheric Corrosion of Carbon Steel Bridge Components in a Changing Climate
Available for download

Prediction Of Atmospheric Corrosion On Steel Bridge Components In A Changing Climate

Product Number: 51322-17953-SG
Author: Istemi F. Ozkan, Dario Markovinovic, Hamidreza Shirkhani, Jieying Zhang, Nafiseh Ebrahimi
Publication Date: 2022
$20.00

There are more than 47,000 publicly-owned roadway bridges in Canada.1 Over 25% of these bridges have main structural load bearing components made of structural steel (i.e., truss and steel girder bridges) based on data from the Ministry of Transportation, Ontario – MTO.2 According to Statistics Canada, the condition of approximately 40% of these bridges is rated as either very poor (unfit for sustained service), poor (increasing potential of affecting service), or fair (requires attention).3  It was reported by Koch et al.4 that corrosion is one of the main reasons that lead to structural deficiency of steel components of highway bridges. Especially in marine environments, steel bridges are at risk of high rates of corrosion, particularly beyond 15-20 years in service.5 This observation can be expanded to locations where the use of de-icing salt is common practice such as urban areas in North America. In addition, future climatic changes that are evident (i.e., change in temperature and relative humidity) may potentially affect the rate of corrosion-induced deterioration and affect the resistance of bridges against various load types throughout their life-cycle. 
Picture for Understanding The Effects Of Zn Injection And OLNC-Treatment On 316 Stainless Steel Oxide Under Simulated BWR Conditions
Available for download

Understanding The Effects Of Zn Injection And OLNC-Treatment On 316 Stainless Steel Oxide Under Simulated BWR Conditions

Product Number: ED22-17227-SG
Author: Dora Capone, Liberato Volpe, Ben F. Spencer, Tsuyoshi Ito, Jonathan Duff, Tsuyoshi Ito, M. Grace Burke, Yoichi Wada, Fabio Scenini, Makoto Nagase
Publication Date: 2022
$20.00

Austenitic stainless-steel alloys are widely used as structural components in light water reactors (LWR) coolant systems, due to their passivity in high temperature water solutions. After initial passivation, subsequent development and dissolution rates of the protective film are very low. Nevertheless, metal cations and colloidal particles that are generated by superficial corrosion of structural materials, can be activated and generate radioactive isotopes that are responsible for radiation source as they circulate through the reactor core. Specifically, the radioactive 60Co, generated by neutron activation of the inactive 59Co (constituent of the naturally occurring Co), releases high-energy γ rays with a half-life of 5.3 years and is the main radiation source in boiling water reactor plants. Mitigating the incorporation of 60Co into stainless-steel oxide depends on understanding the phenomenon of oxide growth and development as a
function of the water chemistry employed, which involves thermodynamic and kinetic considerations.
Picture for Long-Term Performance Of High-Cr, Nickel-Based Weld Alloys In LWR Environments
Available for download

Long-Term Performance Of High-Cr, Nickel-Based Weld Alloys In LWR Environments

Product Number: ED22-17285-SG
Author: Bogdan Alexandreanu, Yiren Chen, Xuan Zhang
Publication Date: 2022
$20.00

Nickel-based Alloy 690 and the associated weld Alloys 52 and 152 are typically used for nozzle penetrations in replacement heads for pressurized water reactor (PWR) vessels, because of their increased resistance to stress corrosion cracking (SCC) relative to Alloys 600, 82, and 182. Many of these reactors are expected to operate for 40-80 years. Likewise, advanced water-cooled small modular reactors (SMRs) will use Ni-Cr alloys in their primary systems and are expected to receive initial operating licenses for 60 years.
Picture for 10049 Deactivation of Industrial Water Treatment Biocides
Available for download

10049 Deactivation of Industrial Water Treatment Biocides

Product Number: 51300-10049-SG
ISBN: 10049 2010 CP
Author: Terry M. Williams and Heather R. McGinley
Publication Date: 2010
$20.00

This paper will provide a review of the specific methods for deactivating the various oxidizing and non-oxidizing biocides commonly used today. Examples of lab and field data will be presented.
Picture for Jateamento Abrasivo ao Metal Branco

Jateamento Abrasivo ao Metal Branco

Product Number: SSPC-SP 5-2007-NACE No. 1-2007-Portuguese
Publication Date: 2007
$179.00

Esta norma conjunta abrange o uso de abrasivos para jateamento com o objetivo de atingir um grau definido de limpeza de superfícies de aço antes da aplicação de um revestimento protetor ou um sistema de revestimento. Esta norma destina-se ao uso por especificadores, aplicadores, inspetores de cobertura ou revestimento ou outros que venham a ser responsáveis por definir um grau padrão de limpeza de superfície.


O foco desta norma é o jateamento abrasivo ao metal branco. O jateamento abrasivo ao metal quase branco, o jateamento abrasivo comercial, o jateamento abrasivo industrial e o jateamento abrasivo brush-off são abordados em normas separadas.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support