Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
3440 total products found.
Peabody's Control of Pipeline Corrosion, 3rd Edition

Peabody's Control of Pipeline Corrosion, 3rd Edition

Product Number: 37617-POD
ISBN: 978-1-57590-336-1
Author: by A.W. Peabody, edited by Ronald Bianchetti
$160.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

For over 50 years Control of Pipeline Corrosion, written by A.W. Peabody, has been the most trusted resource in the field of pipeline corrosion. This revised and updated third edition of the classic reference continues the tradition of excellence by providing the most thorough and authoritative coverage of the prevention and control of pipeline corrosion, and now includes a chapter on AC interference. 

Peabody's Control of Pipeline Corrosion, Third Edition, edited by Ronald Bianchetti, blends traditional corrosion engineering practices with modern technologies to make this the single source for corrosion control. Chapters have updated information and graphics to expand on the user-friendly nature of the original book.

 2018 NACE, 316 pages, 8 x 10" trim size, soft bound.
Picture for 99264 SOLVING CORROSION PROBLEMS AT THE NEA
Available for download

99264 SOLVING CORROSION PROBLEMS AT THE NEA BELLINGHAM MASSACHUSETTS CARBON DIOXIDE RECOVERY PLANT

Product Number: 51300-99264-SG
ISBN: 99264 1999 CP
Author: T. R. DeHart, Dr. DA. Hansen, C.L. Mariz, Dr. J. G. McCullough
$20.00
Picture for The Development of a New Accelerated Corrosion Test Method Using Controlled Relative Humidity
Available for download

The Development of a New Accelerated Corrosion Test Method Using Controlled Relative Humidity

Product Number: 51323-19475-SG
Author: Alexander Lilly, Mirella Vargas, Erica Macha, Dr. Steven Kopitzke, James Dante, Dr. Victor Rodriguez-Santiago
Publication Date: 2023
$20.00

Hexavalent chromium is utilized for the purpose of providing corrosion inhibition on many DoD assets in the form of surface treatments and primers. However, hexavalent chromium is also a known carcinogen and environmental toxin. As a result, processes which involve the application of hexavalent chromium will likely face increased regulation in the future.
Cathodic Protection Survey Procedures, 3rd Edition

Cathodic Protection Survey Procedures, 3rd Edition

Product Number: 37614-POD
$137.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

MUST HAVE CLASSIC: This book was written as a helpful instruction for Cathodic Protection Testers, Technicians and Technologists and others who conduct tests on cathodic protection (CP) systems for on-shore structures.

While there are several texts on the theory and application of CP, there are no books that describe these applicable CP field tests in detail. This book presents a step by step procedure on rectifier or thermoelectric generator adjustments, inspection and basic troubleshooting, structure-to-electrolyte potential measurements, current measurements; diagnostic testing; adjustive surveys; commissioning surveys; close interval potential surveys, stray current interference testing, electrical isolation testing, road/railroad cased crossings, AC voltage testing, soil resistivity measurements, and CP tests on well casings, aboveground storage tanks and underground tanks. Included under each of these subjects is a list of the tools and equipment or safety equipment needed, precautions to be followed, the step by step procedure, an analysis of the test results and applicable references.

The contents of the book are directed to those who are new to the CP arena, others who do not regularly complete all of these CP field tests, and as a refresher to experienced CP personnel.

2016 by NACE International, 7" x 9", perfect bound, 342 pages.
Picture for 02236 A Neural Network for Predicting Corrosion...
Available for download

02236 A Neural Network for Predicting Corrosion of Grade N80 Downhole Tubulars Exposed to Stimulation Fluids

Product Number: 51300-02236-SG
ISBN: 02236 2002 CP
Author: Juanita M. Cassidy and Terry H. McCoy
$20.00
Picture for 11390 A New Solid Isothiazolone Biocide for Industrial Water Treatment
Available for download

11390 A New Solid Isothiazolone Biocide for Industrial Water Treatment

Product Number: 51300-11390-SG
ISBN: 2011 11390 CP
Author: Terry M. Williams, Ph.D. and Christine Schultz
Publication Date: 2011
$20.00
Picture for 04357 CO2 Corrosion of Steel in Formate Brines
Available for download

04357 CO2 Corrosion of Steel in Formate Brines for Well Applications

Product Number: 51300-04357-SG
ISBN: 04357 2004 CP
Author: Hakon Leth-Olsen, Norsk Hydro ASA
$20.00
Picture for The Complexities of SSC testing of SMSS From A Steelmaker’s Perspective
Available for download

The Complexities of SSC testing of SMSS From A Steelmaker’s Perspective

Product Number: 51319-12893-SG
Author: Kuangnan Chi
Publication Date: 2019
$20.00

Norsok M-650 qualification of 13Cr Super Martensitic Stainless Steel (SMSS) requires sulphide stress corrosion cracking (SSC) testing. The present investigation evaluated three casts processed by hot rolling and heat treated to a specified minimum yield strength (SMYS) of 110ksi. Testing was conducted as per NACE TM0177 Method A by two testing laboratories under identical conditions.The influence of microstructural phases specimen preparations and control of test parameters are assessed in relation to SSC performance. Specifically this paper discusses the complexities of SSC testing from a steelmaker’s perspective.
Picture for Innovative Mitigation Strategies to Address Ac Corrosion At Higher Frequencies
Available for download

Innovative Mitigation Strategies to Address Ac Corrosion At Higher Frequencies

Product Number: 51323-19280-SG
Author: Wolfgang Fieltsch, J. Scott Farquharson
Publication Date: 2023
$20.00

A corrosion investigation performed in 2018 on an NPS 6, approximately 4 km long, polyethylene coated pipeline determined that the accelerated corrosion anomalies detected during in-line inspections (ILI) were due to AC corrosion. The AC and DC current densities on the AC coupons adjacent to these anomalies were above the limits recommended in NACE SP21424. It was also determined that the line was cathodically over-protected, and that most of the AC voltage measured on the line was due to 120 Hz AC ripple from a foreign rectifier.
Picture for Corrosion Testing of Additive Manufactured Materials
Available for download

Corrosion Testing of Additive Manufactured Materials

Product Number: 51323-19317-SG
Author: Robert P. Badrak
Publication Date: 2023
$20.00

Additive manufacturing (AM) is a term that is used to describe a family of processes that adds material in a controlled way to produce a structure or product. It has been used for many years for polymeric materials and its origin can be traced to Japan in the early 1980’s. The industrial use of AM polymeric products, then commonly introduced as stereolithography, got its start from an invention using a computer-controlled laser beam to harden a liquid polymer by Charles Hull in 1983.
Corrosion Control in Petroleum Production, Third Edition

Corrosion Control in Petroleum Production, 3rd Edition

Product Number: 37646-POD
ISBN: 978-1-57590-389-7
Author: Robert J. Franco & Timothy Bieri
$148.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas.

The book provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement.

The authors, Robert Franco and Tim Bieri, have distilled over 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference.

Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

 2020 NACE, 536 pages, 6 x 9" trim size, perfect bound, color
Picture for TTT-02 Travel Policy and Instructor Ambassadorship
Available for download

TTT-02 Travel Policy and Instructor Ambassadorship

Product Number: TTT-02 Travel Policy
$0.00

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support