Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
3445 total products found.
Picture for Microbiologically Influenced Corrosion In A Gas Storage Well
Available for download

Microbiologically Influenced Corrosion In A Gas Storage Well

Product Number: 51321-16680-SG
Author: Noelle Easter C. Co; Ryan D. Milligan; Ming Gao; Rudolf H. Hausler; Ravi M. Krishnamurthy
Publication Date: 2021
$20.00
Picture for Effect Of Flow On The Corrosion Behavior Of Pipeline Steels Under Supercritical CO2 Environment With Impurities
Available for download

Effect Of Flow On The Corrosion Behavior Of Pipeline Steels Under Supercritical CO2 Environment With Impurities

Product Number: 51321-16656-SG
Author: Martin Colahan; Yoon-Seok Choi; Srdjan Nesic
Publication Date: 2021
$20.00
Picture for 98094 THE APPLICATION LIMITS OF ALLOYED 13%Cr
Available for download

98094 THE APPLICATION LIMITS OF ALLOYED 13%Cr TUBULAR STEELS FOR DOWNHOLE DUTIES

Product Number: 51300-98094-SG
ISBN: 98094 1998 CP
Author: P. J. Cooling, M. B. Kennani, J. W. Martin, P. I. Nice
$20.00
Picture for Case Study on the Failure of Duplex Stainless Steel Heat Exchanger from Thermal Shock
Available for download

Case Study on the Failure of Duplex Stainless Steel Heat Exchanger from Thermal Shock

Product Number: 51324-20923-SG
Author: Immad Ovais Rohela; Yasar Irshad; Ahmad Raza Khan Rana; Syed Umair Niaz Bukhari
Publication Date: 2024
$40.00
Shell & tube heat exchangers are prone to degradation from corrosion and fouling. Recent advents in the industry recommend the use of corrosion-resistant alloys to reduce failure risks. This paper addresses the case study on the two different failure incidents of a formic acid heat exchanger (material: SS 316L, UNS S31603) that failed due to the corrosivity of the service which was followed by the material upgrade to super duplex SS Grade (UNS S32750). The exchanger later failed due to unanticipated cracks at the tube-tube sheet weld joints. The study investigates the root cause(s) behind the failures in light of inspection findings, operating history, and a review of the material’s mechanical and metallurgical properties. This study also recommends mitigative measures to avoid such failure events.
Picture for Forensic Investigation of Corrosion under Insulation from Rust Scale Sample
Available for download

Forensic Investigation of Corrosion under Insulation from Rust Scale Sample

Product Number: 51324-20890-SG
Author: Ahmad Raza Khan Rana; Salwa Alachkar; Touqeer Sohail; Syed Umair Niaz Bukhari; Shahzad Karim; Graham Brigham
Publication Date: 2024
$40.00

Corrosion under insulation (CUI) is among the leading damage mechanisms in oil refining and hydrocarbon production facilities. CUI reportedly drives 40-60 % of the piping-related repairs and constitutes 10% of the overall maintenance spending. Numerous conventional and advanced inspection measures look for the occurrence and severity of CUI. On the other hand, the CUI formation reasons, and kinetics may not be well understood with the common inspection strategies. Like any other type(s) of corrosion, the rust scale samples can provide useful evidence in understanding CUI. With clarity on drivers and kinetics, the root cause analysis and decision making for CUI management can benefit from such information on drivers and kinetics. This article addresses the three different case studies on the forensic investigation of CUI via chemical analysis of rust scale samples. Rust samples from various assets in downstream and upstream facilities were analyzed using x-ray diffraction (XRD) which revealed range of corrosion products such as hematite (Fe2O3), goethite (a-FeOOH), akageneite (ß-FeOOH), magnetite (Fe3O4), etc. The study then addresses the kinetics behind these corrosion products and suggests some practical measures for utilizing the forensic information on rust scale(s).
Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines

Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines

Product Number: 37610-POD
ISBN: 978-1-57590-328-6
Author: Richard Eckert
$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This book by renowned expert Richard Eckert is intended to help oil and gas pipeline operators, corrosion professionals, integrity experts and risk management practitioners assess, control, and manage the effects of internal corrosion on pipeline systems, thus improving the safety, reliability and integrity of their operations.

While the focus of this book is on pipelines, the content is broadly applicable to upstream equipment, processing facilities, mid-stream pipelines, liquid and gas storage assets, and delivery/distribution assets.

2016 NACE, 7 x 9" trim size, softbound, 368 pages.
Thermal Spray Coatings - Past, Present & Future
Available for download

Thermal Spray Coatings - Past, Present & Future

Product Number: 41205-159-SG
Author: Ted Call
Publication Date: 2005
$20.00

Thermal spray coatings (TSC) have been successfully used in all major sectors of the marine and industrial corrosion control coatings market.
Ballast Tank Coating Inspection by Imaging Fluorescent Coatings
Available for download

Ballast Tank Coating Inspection by Imaging Fluorescent Coatings

Product Number: 41205-169-SG
Author: Paul D. Gossen
Publication Date: 2005
$20.00

Improved holiday detection of new coatings in ballast tanks on Navy ships can increase the coating’s service life. This paper describes development of a fast, compact and portable holiday detector based on imaging of fluorescent coatings.
New Disposable Spray Systems: Quick to Change, Quick to Clean, Quick to Coat
Available for download

New Disposable Spray Systems: Quick to Change, Quick to Clean, Quick to Coat

Product Number: 41205-182-SG
Author: Anthony R. Martucci
Publication Date: 2005
$20.00

People have been spraying two-component materials for decades.  Some processes are very rudimentary, such as mixing by hand and brushing the material on the surface.  More recent techniques would be impingement mixing the material (using air to force the materials together and then spraying the material on the surface).  
Alphatic Polyurea Speification - The Development of SSPC Paint Specification 39
Available for download

Alphatic Polyurea Speification - The Development of SSPC Paint Specification 39

Product Number: 41205-183-SG
Author: Michael J. Masciale
Publication Date: 2005
$20.00

Recent polyurea resin technology advances have allowed for the development of value-added polyurea topcoats that are proving to be valuable alternatives for many polyurethane applications.  The development of an SSPC specification for a weatherable polyurea topcoat is discussed for the purpose of providing a standard that will be acceptable throughout our industry.
Coating Masonry Substrates
Available for download

Coating Masonry Substrates

Product Number: 41205-196-SG
Author: Bill Rafie
Publication Date: 2005
$20.00

This presentation will focus on the performance and aesthetic issues encountered when painting masonry surfaces. Contractors will also learn how to cost-effectively add color and improve appearance and weather protection to masonry jobs. Objectives of the presentation are: education on proper surface preparation, how to select an appropriate coating for a long-lasting finish and new coating technology.
Designing a Maintenance Painting Management Program
Available for download

Designing a Maintenance Painting Management Program

Product Number: 41205-209-SG
Author: Kenneth A. Trimber
Publication Date: 2005
$20.00

Computerized maintenance painting management programs are used to inventory painted items, maintain historical coating data, optimize the scheduling of painting activities, and develop budget estimates for the work. While the sophisticated programs are quite effective, their true benefit is not realized unless someone takes ownership of the program, updates the data every few years, and uses the wealth of planning information that is available.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support