Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
93 total products found where category is "Books".
Galvanic Corrosion: A Practical Guide for Engineers, 2nd Edition

Galvanic Corrosion: A Practical Guide for Engineers, 2nd Edition

Product Number: 37625-POD
ISBN: 978-1-57590-353-8
Author: Roger Francis
$105.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Galvanic corrosion occurs when two dissimilar metals are electrically coupled in an eletrically conducting, corrosion fluid. Under these conditions, the rate of corrosion of one member of the couple is increased above that which would occur if the metal were exposed in isolation.

The author, Roger Francis, provides answers for common questions concerning galvanic corrosion and how to not only stop it, but prevent it.

2017 NACE, 8 x 10" trim size, softbound, 150 pages.
Picture for Coatings Failures Case Studies in Analysis and Solutions - Infrastructure
Available for download

Coatings Failures Case Studies in Analysis and Solutions - Infrastructure

Product Number: 37671-pdf
ISBN: 978-1-57590-467-2
Author: Edited by Jean Broge
$55.00

In this multi-author book, Coatings Failures: Case Studies in Analysis and Solutions-Infrastructure, coatings experts recall days in the field when they were faced with a problem, such as premature coating failures, determined a cause, and developed a solution.  

The six chapters include case studies on topics such as how alkyd paints should never be used on steel that is intended for immersion service; how important it is to remember buildings such as coal-fired power plants have many different types of piping, structures, and other areas that operate at different temperatures, with many different functions; how when evaluating peeling paint on structures such as pedestrian bridges, it is always a good idea to do some adhesion testing in areas that appear to be non-failing; and more.
Picture for Galvanic Corrosion A Practical Guide for Engineers - Second Edition

Galvanic Corrosion A Practical Guide for Engineers - Second Edition

Product Number: 37625-pdf
ISBN: 978-1-57590-456-6
Author: Roger Francis
$105.00

Galvanic corrosion occurs when two dissimilar metals are electrically coupled in an eletrically conducting, corrosion fluid. Under these conditions, the rate of corrosion of one member of the couple is increased above that which would occur if the metal were exposed in isolation.

The author, Roger Francis, provides answers for common questions concerning galvanic corrosion and how to not only stop it, but prevent it.
The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

Product Number: 37636-POD
ISBN: 978-1-57590-369-9
Author: Roger Francos
$150.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

In The Corrosion of Duplex Stainless Steels, author Roger Francis reviews various duplex alloy compositions, mechanical properties, and design stresses for vessels and pipes to various codes. He also covers the basics of welding duplex alloys, both to themselves and to other alloys, and their corrosion resistance.

Of most importance, the book looks at a variety of types of corrosion that may affect DSSs in service, presenting the available data and, in some cases, how to avoid problems.

2018 NACE, 256 pages, 8 x 10" trim size, color, perfect bound.

 

Corrosion of Duplex Stainless Steels

Download the free white paper summary of this title to see specific areas of focus and discussion

Picture for The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers
Available for download

The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

Product Number: 37636-pdf
ISBN: 978-1-57590-459-7
Author: Roger Francis
Publication Date: 2018
$150.00

Since the 1980s, a range of duplex stainless steels (DSSs) has been developed that have higher alloy content, and therefore greater corrosion resistance and strength. The commonly used DSSs have good corrosion resistance in a wide range of environments and excellent resistance to stress corrosion cracking (SCC). Their high strength and hardness also gives them excellent resistance to both erosion corrosion and cavitation. There are also cast versions of many of the duplex compositions and these have seen extensive use for pumps, valves, and other equipment.
Crude Unit Corrosion Guide - A Complete How-To Guide, 3rd edition

Crude Unit Corrosion Guide - A Complete How-To Guide, 3rd edition

Product Number: 37612-POD
ISBN: 978-1-57590-330-9
Author: Joerg Gutzeit
$127.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Written for Plant Operators, Process Engineers, Metallurgists, Maintenance Engineers, Inspectors, and all others who deal with crude unit corrosion and fouling. Based on industrial experience and reflects Industry’s consensus 2016 NACE, API
Picture for Inspection of Coatings & Linings: A Handbook

The Inspection of Coatings and Linings: A Handbook of Basic Practice for Inspectors, Owners and Specifiers

Product Number: 38311
ISBN: 1889060119
Author: Edited by B.R. Appleman, R.W. Drisko, and J.M. Neugebauer
Publication Date: 1998
$195.00

Information, procedures, standards & practices for inspection of coatings and linings on industrial structures. Provides coatings inspectors the resources to perform inspections. Referencees, Appendices, Glossary, Index. 1998 SSPC 
'Corrosion-Related Failure Cases: A Collection of AMPP, NACE, and SSPC Research
Available for download

Corrosion-Related Failure Cases: A Collection of AMPP, NACE, and SSPC Research

Product Number: 37692-pdf
Author: Multiple Authors
$250.00

PRE-ORDER TODAY: 

When failures and incidents occur, corrosion nearly always emerges as the primary culprit, whether the failures are minor or major. Major incidents, naturally, magnify the consequences and have a significant impact on Health, Safety, and the Environment (HSE), as well as other factors such as: 

  •   Workplace injuries or fatalities
  •   Environmental pollution
  •   Property and equipment damage
  •   Production downtime
  •   Legal repercussions
  •   Economical losses
  •   Reputational harm

To prevent failures and their associated problems, it is crucial for engineers and professionals worldwide to share their experiences and the identified root causes for failures. Collaborative efforts can help raise awareness and prompt organizations to take necessary precautions, implement corrosion control measures, and thereby reducing the likelihood of catastrophic failures while ensuring the integrity of assets.

It is in that spirit, this title readers will gain insights into the effects of microorganisms such as sulfate-reducing bacteria, iron-reducing bacteria, and methanogens on internal corrosion in piping, the intricacies of coatings applications and lining damages in pipelines, investigations into erosion corrosion in wells, and the complexities of alternating current-cathodic protection failures. 
Coatings Failures: Analysis and Solutions--Infrastructure

Coatings Failures: Analysis and Solutions--Infrastructure

Product Number: 37671-POD
ISBN: 978-1-57590-420-7
$55.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

In this multi-author book, Coatings Failures: Case Studies in Analysis and Solutions-Infrastructure, coatings experts recall days in the field when they were faced with a problem, such as premature coating failures, determined a cause, and developed a solution.  

The six chapters include case studies on topics such as how alkyd paints should never be used on steel that is intended for immersion service; how important it is to remember buildings such as coal-fired power plants have many different types of piping, structures, and other areas that operate at different temperatures, with many different functions; how when evaluating peeling paint on structures such as pedestrian bridges, it is always a good idea to do some adhesion testing in areas that appear to be non-failing; and more. 

2022 AMPP, 6 x 9 trim size, softbound
Picture for Corrosion 93 Plenary and Keynote Lectures

CORROSION/93 Plenary and Keynote Lectures--A 50-Year History of Corrosion Prevention and Control

Product Number: 37362
ISBN: 1877914495
Author: Edited by R.D. Gundry
$10.00
Forms of Corrosion: Recognition and Prevention, Second Edition (E-Book)
Available for download

Forms of Corrosion: Recognition and Prevention, Second Edition (E-Book)

Product Number: 37626-E
ISBN: 978-1-57590-354-5
Author: Dale McIntyre
Publication Date: 2019
$215.00

The Second Edition of this classic handbook combines Volumes 1 and 2 of the First Edition into a single volume, adding updated commentary and many new case histories. Mechanisms and numerous case histories illustrate general, localized and galvanic corrosion, environmental cracking, erosion-corrosion, cavitation, fretting, intergranular attack, dealloying, and high-temperature corrosion.

This book presents detailed corrosion mechanisms and case histories of a wide variety of corrosion problems from chemical plants, oil production and refining, utilities, pipelines, transport by air, land, and sea, electronics, and the preservation of historical artifacts. The uses of advanced analytical techniques such as electron microscopy, metallography, energy-dispersive X-ray spectroscopy, Aüger spectroscopy and electrochemical techniques are presented to illustrate their utility in corrosion failure investigations.
Picture of Introductory Handbook for NACE MR0175/ISO 15156 (E-book)
Available for download

Introductory Handbook for NACE MR0175/ISO 15156 (E-book)

Product Number: 37607-E
ISBN: 978-1-57590-320-0
Author: Derek Milliams
Publication Date: 2016
$59.00

ANSI/NACE MR0175/ISO 15156 standard in context of the corrosion science and the forms of cracking that led to its development. Usage. User Support. Documents.  Laboratory tests to confirm cracking resistance of materials in O & G environments. 2016 NACE E-BOOK

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support