AMPP Store - Search

Available for download

NACE SP0169-2024, Control of External Corrosion on Underground or Submerged Metallic Piping Systems

Product Number: NACE SP0169-2024

Publication Date: 2024

$109.00

This standard presents methods and practices for achieving effective control of external corrosion on underground or submerged metallic piping systems and is intended for use by corrosion control personnel concerned with piping used for the transport of oil, gas, water, and other fluids. It is applicable to underground structures and piping buried on land, or submerged in water bodies such as lakes, rivers, bayous, and creeks.

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$180.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

NACE SP0199-2024, Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

Product Number: NACE SP0199-2024

$109.00

The purpose of this standard practice is to provide technical and quality assurance guidelines for the fabrication, welding, and installation of stainless chromium-nickel steel and nickel-alloy roll-bonded and explosion-bonded clad plate in air pollution control equipment. It is intended for use by personnel including architect-engineers, designers, fabricators, and personnel from electric utilities.

Available for download

NACE RP0176-2003, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production

Product Number: NACE RP0176-2003

Publication Date: 2003

$179.00

HISTORICAL DOCUMENT. This standard provides guidelines for establishing minimum requirements for the control of corrosion on steel fixed offshore structures associated with petroleum production, and on the external portions of associated oil and gas handling equipment. Fixed structures include platforms, tension leg platforms (TLPs), and subsea templates. This standard does not include guidelines for corrosion control of temporarily moored mobile vessels used in petroleum production.

Available for download

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Product Number: NACE SP0291-2023

Publication Date: 2023

$109.00

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Available for download

NACE TM21420-2023, Test Method for Measurement of Peel Strength of Multilayer Polyolefin Coating Systems

Product Number: NACE TM21420-2023

Publication Date: 2023

$109.00

This test method describes a reliable methodology for determining the peel strength of polyolefin-based multilayer pipeline coating systems, generally for coating thickness less than 12 mm (0.47 in). This standard provides a method to measure the peel strength of polyolefin-based multilayer coating systems, such as 2-layer polyethylene coating (2LPE), 3-layer polyethylene (3LPE), 3-layer polypropylene (3LPP), and heat shrink sleeve (HSS) field joint coating. It provides essential information on the quality of the applied coating. This is particularly important for field-applied coatings, of which the application process is significantly impacted by the environmental conditions and the skill set of the field applicators.

Available for download

NACE SP0192-2023, Monitoring Corrosion in Oil and Gas Production with Iron Counts

Product Number: NACE SP0192-2023

Publication Date: 2023

$109.00

This standard practice describes the use of iron counts as a corrosion-monitoring method and some common problems encountered when using this method. This standard is a guide for those designing corrosion-monitoring programs as well as those carrying out the programs in the field.

Available for download

NACE TM21431-2023, Test Methods to Evaluate Thermal Properties and Performance of Insulative Coatings

Product Number: NACE TM21431-2023

Publication Date: 2023

$109.00

The primary intent of this standard is to specify test conditions that would give a baseline evaluation – one that would allow direct performance comparisons between different insulative coatings. This standard is designed to have practical test procedures with limited test conditions. It also includes Appendix A (nonmandatory) which describes hot plate designs, and Appendix B (nonmandatory) which describes an alternative thermal conductivity test design.

Available for download

NACE TM0208-2024, Laboratory Test to Evaluate the Vapor- Inhibiting Ability of Volatile Corrosion Inhibitor Materials for Temporary Protection of Ferrous Metal Surfaces

Product Number: NACE TM0208-2024

Publication Date: 2024

$109.00

Volatile corrosion inhibitor (VCI) materials provide temporary corrosion protection for the surfaces of metal parts that are not in contact with the inhibitor. Temporary protection is afforded as long as there is a moderately sealed enclosure containing the metal parts and the source of the VCI, which may be in the enclosing package itself. The duration of protection may be months to years before the parts are removed from the enclosure and put to use, or before a more “permanent” coating such as paint is applied. The referenced NACE Standard Practice SP0487 includes VCI in the context of guidance and best practices for users of interim or temporary corrosion protection methods.

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

Available for download

NACE SP0206-2006, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)

Product Number: NACE SP0206-2006

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. This standard practice formalizes a methodology termed internal corrosion direct assessment for pipelines carrying normally dry natural gas (DG-ICDA)^1,2,3 that can be used to help ensure pipeline integrity. The methodology is applicable to natural gas pipelines that normally carry dry gas, but may suffer from infrequent, short-term upsets of liquid water (or other electrolyte). This standard is intended for use by pipeline operators and others who manage pipeline integrity.

Available for download

NACE No. 2/SSPC-SP 10-HD1994-SG Near-White Metal Blast Cleaning-HD1994

Product Number: 21066-HD1994

Author: NACE SSPC

Publication Date: 1994

$179.00

Requirements for "Near-White Metal" - one of four levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Brush Off) Historical Document 1994

Search and Filter

NACE SP0169-2024, Control of External Corrosion on Underground or Submerged Metallic Piping Systems

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

NACE SP0199-2024, Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

NACE RP0176-2003, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

NACE TM21420-2023, Test Method for Measurement of Peel Strength of Multilayer Polyolefin Coating Systems

NACE SP0192-2023, Monitoring Corrosion in Oil and Gas Production with Iron Counts

NACE TM21431-2023, Test Methods to Evaluate Thermal Properties and Performance of Insulative Coatings

NACE TM0208-2024, Laboratory Test to Evaluate the Vapor- Inhibiting Ability of Volatile Corrosion Inhibitor Materials for Temporary Protection of Ferrous Metal Surfaces

ANSI/NACE MR0175/ISO 15156-2009

NACE SP0206-2006, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)

NACE No. 2/SSPC-SP 10-HD1994-SG Near-White Metal Blast Cleaning-HD1994

Association for Materials Protection and Performance