The “CorrCompilation: Oilfield Production Chemicals” series covers production, selection, performance evaluation, application, monitoring, and optimization of oilfield chemicals. The oilfield chemicals presented are corrosion inhibitors, biocides, scale inhibitors, and drag reducers. The editor, Joseph Itodo Emmanuel, believes it is a “must-have reference book” for corrosion engineers in the field, technicians, and field operation supervisors due to its broad spectrum. 

He suggests the compilation could be used for a university-level engineering or scientific course on oilfield chemicals or tailored training to enhance the technical knowledge of field personnel on oilfield chemical application and management.

Since this CorrCompilation series consists of 90 NACE technical papers or articles, it is published in three volumes.

Volume 1: Development and Selection

Volume 2: Performance Evaluation and Application

Volume 3: Monitoring and Optimization

Each volume contains current research findings, field treatment practices, best practices, and scientific and engineering concepts.

2019 NACE e-book

 Joint Industry Project “Materials Specification for HF Alkylation Plant” to develop test and corrosion rate measurement procedures for materials in HF environments and to develop a carbon steel materials specification w.r.t levels of residual elements and carbon in steels for HF alkylation equipment.

This CorrCompilation series focuses primarily on equilibrium-formed scales, where an aqueous fluid changes from an unsaturated equilibrium state to a saturated and supersaturated state and then solids may start to form. These types of fouling minerals include alkaline earth salts, silicates, alkaline salts (NaCl), sulfides, and under specific circumstances, metal sulfide salts that form through equilibrium changes. While corrosion product scales are not the subject of this book, the importance of corrosion product layers to the deposition of other scales will be described. 

Since this is a CorrCompilation and more than 90 copies of NACE papers are included, the work is published in four volumes. The editor, Wayne W. Frenier, FNACE, provides an extensive introduction to each volume, offering the reader a thorough mix of history, theory, and engineering techniques and methods for addressing scale.

Volume 1: Introduction to Equipment Subject to Inorganic Scale

Volume 2: Current Mechanisms for Understanding Inorganic Scale Formation and Deposition

Volume 3: Chemistry and Application of Scale Inhibitors

Volume 4: Alternative Methods of Scale Control

This volume, “Chemistry and Application of Scale Inhibitors,” will describe current scale inhibitor (SI) chemicals and theories of their modes of action. These chemicals are used to inhibit (reduce) the detrimental effects of mineral scales on oil and gas as well as other industrial surfaces.

This is a print-on-demand (POD) book that will be produced just for you, and should arrive to your door about from six to eight days after your order; allow two to three weeks for international orders.

To stay competitive in the corrosion industry, companies must continually be looking for more efficient, safe, and cost-effective ways to inspect and maintain assets. There are many opportunities for the increased use of robotic solutions in all aspects of the corrosion industry, but the primary reasons focus on limiting human intervention for both safety and accuracy.

This book presents the reader with multiple examples of the use of robotic unmanned and remote-controlled systems, be they underground, on the ground, or in the air.  

2020 NACE, 6" x 9" trim size, B&W, perfect bound, 62 pages

It is a well-admitted fact that oxygen contamination shall be avoided during standard H2S cracking tests. Until 2016 NACE technical methods related to H2S cracking resistance evaluation (e.g. NACE TM0284 and NACE TM0177) only gave general suggestions about O2 pollution. For instance it was recommended that ‘tests vessels shall be capable of being purged to remove O2’ and also that ‘O2 contamination is evident by a cloudy appearance’. In the 2016 revisions of NACE TM0177 and NACE TM0284 documents quantitative limits of O2 contamination were included:- Test method must ensure that the test solution contains less than 50 mass. ppb dissolved O2 before the introduction of H2S.- A more stringent limit of 10 ppb max. is imposed when testing Corrosion Resistant Alloys (CRA) or high strength low alloy steels (> 80 ksi).However the scientific basis of these values have not been well-established yet and there is still a lack of available experimental data to illustrate the potential impacts of small dissolved oxygen contents on the cracking resistance of different materials. In addition while the revised test methods explicitly address initial contamination of the test solution before H2S introduction they do not consider a continuous oxygen supply during testing. This possible continuous O2 contamination is extremely difficult to eliminate and control for example in case of poor laboratory practices oxygen ingress may arise by permeation through polymer tubings used for the tests or in case of a lack of tightness of gaskets.In order to better understand the impact of O2 contamination on H2S cracking a 3-years Joint Industrial Project (JIP) was launched at the end of 2015. The objectives were to evaluate if continuous O2 contamination can affect H2S cracking test results. A range of steel grades covering different types of O&G applications such as line pipe OCTG and flexible wires were used. Sulfide Stress Cracking (SSC uniaxial tensile as well as 4 point-bend tests) and Hydrogen Induced Cracking (HIC) tests were conducted with well-controlled and continuous O2 contamination. Three levels of O2 partial pressures in the gas feed corresponding to 300 ppb 50 ppb and less than 10 ppb dissolved O2 were used. These levels were selected to simulate poor deaeration and the current limits specified in the last standard revisions respectively.In parallel to the standard qualification tests hydrogen permeation and weight-loss corrosion experiments were performed with the same test matrix covering all regions of the SSC severity diagram. This paper aims at sharing the main results of this JIP. 

The “CorrCompilation: Oilfield Production Chemicals” series covers production, selection, performance evaluation, application, monitoring, and optimization of oilfield chemicals. The oilfield chemicals presented are corrosion inhibitors, biocides, scale inhibitors, and drag reducers. The editor, Joseph Itodo Emmanuel, believes it is a “must-have reference book” for corrosion engineers in the field, technicians, and field operation supervisors due to its broad spectrum. 

He suggests the compilation could be used for a university-level engineering or scientific course on oilfield chemicals or tailored training to enhance the technical knowledge of field personnel on oilfield chemical application and management. 

Since this CorrCompilation consists of 90 NACE technical papers or articles, it is published in three volumes. 

Volume 1: Development and Selection

Volume 2: Performance Evaluation and Application

Volume 3: Monitoring and Optimization

Each volume contains current research findings, field treatment practices, best practices, and scientific and engineering concepts.

2019 NACE e-book

Materials Performance (MP) is the world's largest circulation journal dedicated exclusively to corrosion prevention and control.

Subscribe today to access monthly content that includes:

Articles

• Technical Articles
• Features
• Case Histories
• Technical and industry news
• NACE association news
• Corrosion Basics

Corrosion Control Technologies

• Coatings and linings
• Cathodic protection
• Materials selection and design
• Chemical treatment

Materials Performance (MP) is the world's largest circulation journal dedicated exclusively to corrosion prevention and control.

Subscribe today to access monthly content that includes:

Articles

• Technical Articles
• Features
• Case Histories
• Technical and industry news
• NACE association news
• Corrosion Basics

Corrosion Control Technologies

• Coatings and linings
• Cathodic protection
• Materials selection and design
• Chemical treatment

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Potential Theory Applied to Cathodic Protection Design provides the mathematical development of analytical equations for the design of cathodic protection (CP) systems for underground structures with anode groundbeds having various configurations. Equations include calculations for the resistance and voltage (potential) and will assist the CP design engineer.

2021 NACE. B&W, perfect bound, 124 pages, 6 x 9" trim size

La profesión de la corrosión y los profesionales certificados que trabajan en la industria están comprometidos a proteger a las personas, los activos y el medio ambiente de los efectos de la corrosión. Aquellos encargados de entregar la experiencia técnica a la sociedad deben realizar su trabajo con el conocimiento y la comprensión de los principios éticos que se esperan y requieren de esos profesionales.

El Código de Ética Internacional de NACE se discute junto con estudios de casos y presenta violaciones éticas de la vida real de las atestaciones del Instituto Internacional de NACE. En este curso se revisan los marcos para tomar decisiones éticas junto con los factores de la industria de la corrosión que pueden conducir a un comportamiento no ético.

El curso es un curso en línea de autoaprendizaje que no debería tomar más de 1,5 a 2 horas para completar.

_____________________________________________________________

The corrosion profession, and the certified professionals who work in the industry, are committed to protecting people, assets and the environment from the effects of corrosion. Those tasked with delivering the technical expertise to society must conduct their work with the knowledge and understanding of the ethical principles expected and required of those professionals.

The NACE International Code of Ethics is discussed in conjunction with case studies and features real-life ethical violations of the NACE International Institute attestations. Frameworks for making ethical decisions are reviewed in this course along with the factors in the corrosion industry that can lead to unethical behavior.

The course is an online, self-paced course in SPANISH which should take no longer than 1.5 to 2 hours to complete.

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.

2017 NACE, 7" x 9", soft cover, 264 pages