Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
3374 total products found.
Picture for Qualification of Seamless X60QOS and X65QOS Line Pipe Grades for Extreme Sour Service Conditions with Partial Pressure of H2S beyond 1 Bar
Available for download

Qualification of Seamless X60QOS and X65QOS Line Pipe Grades for Extreme Sour Service Conditions with Partial Pressure of H2S beyond 1 Bar

Product Number: MPWT19-15127
Author: Florian THEBAULT, Laurent LADEUILLE, Harold EVIN, Laurent LAMPS
Publication Date: 2019
$0.00

Seamless X60QOS and X65QOS line pipes are widely used for offshore and onshore Sour Service applications. Sour Service refers to the risk of hydrogen related cracking as Sulfide Stress Cracking (SSC). The International standard (NACE MR0175 / ISO 15156) provides requirements for assessing the resistance to SSC, specifically on how to qualify for use in region 3 of the environmental severity diagram (Figure 1 in paragraph 7.2.1.2 of part 2). It is requested to expose materials in an acid solution saturated by 1 bar of H2S (NACE TM0177 Solution A) and to apply a tensile stress above 80% AYS by means of different methods: uniaxial tensile, C-ring or Four-Points Bend. However, for very sour fields presenting H2S partial pressures much higher than 1 bar, the preservation of the SSC resistance might be questioned and is presently a major concern for the O&G industry.
The present paper is dedicated to the evaluation of the SSC resistance of seamless quenched and tempered X65 grades, including the girth weld in the standard NACE TM0177 Solution A up to 15 bar of H2S partial pressure. Corrosion tests consisted of four-point bend tests performed in autoclave vessels. Different test configurations were investigated as specimen sampling locations through the wall thickness and surface state preparation.
Picture of BRIDGES: A LOOK BACK Historic Studies in Cathodic Protection: The 1990s
Available for download

BRIDGES: A LOOK BACK Historic Studies in Cathodic Protection: The 1990s

Product Number: 37682-pdf
ISBN: 978-1-57590-439-9
Author: Jean Broge
$91.00

RARELY SEEN RESEARCH: Bridges: A Look Back—Historic Studies in Cathodic Protection: The 1990s, is a companion book to Bridges: A Look Back—Case Studies in Cathodic Protection: Substructures and Bridges: A Look Back—Case Studies in Cathodic Protection: Superstructures, both of which consist of nearly 30 years of curated legacy NACE technical papers and journal articles that cover exactly what the titles suggest. 

This book consists of edited case histories, while the two original titles are compiled of the original, unabridged technical papers and journal articles.

 

2023 AMPP, 6 x 9 trim size, 52 pages, color

 
Picture for 02236 A Neural Network for Predicting Corrosion...
Available for download

02236 A Neural Network for Predicting Corrosion of Grade N80 Downhole Tubulars Exposed to Stimulation Fluids

Product Number: 51300-02236-SG
ISBN: 02236 2002 CP
Author: Juanita M. Cassidy and Terry H. McCoy
$20.00
Picture for 11390 A New Solid Isothiazolone Biocide for Industrial Water Treatment
Available for download

11390 A New Solid Isothiazolone Biocide for Industrial Water Treatment

Product Number: 51300-11390-SG
ISBN: 2011 11390 CP
Author: Terry M. Williams, Ph.D. and Christine Schultz
Publication Date: 2011
$20.00
Picture for 04357 CO2 Corrosion of Steel in Formate Brines
Available for download

04357 CO2 Corrosion of Steel in Formate Brines for Well Applications

Product Number: 51300-04357-SG
ISBN: 04357 2004 CP
Author: Hakon Leth-Olsen, Norsk Hydro ASA
$20.00
Picture for COA-Coating Systems Use in Conjunction with Cathodi

Coatings and Linings CICS-Coating Systems Used in Conjunction with Cathodic Protection

Product Number: 37239
ISBN: COA-Coating Sys
$55.00
CorrCompilation: Advancements for Control of Inorganic Scale, Volume 4
Available for download

CorrCompilation: Advancements for Control of Inorganic Scale, Volume 4 (e-book)

Product Number: 37651-e
ISBN: 978-1-57590-394-1
Author: edited by Wayne W. Frenier, FNACE
Publication Date: 2019
$125.00

This CorrCompilation series focuses primarily on equilibrium-formed scales, where an aqueous fluid changes from an unsaturated equilibrium state to a saturated and supersaturated state and then solids may start to form. These types of fouling minerals include alkaline earth salts, silicates, alkaline salts (NaCl), sulfides, and under specific circumstances, metal sulfide salts that form through equilibrium changes. While corrosion product scales are not the subject of this book, the importance of corrosion product layers to the deposition of other scales will be described.

Since this is a CorrCompilation and more than 90 copies of NACE papers are attached, the work is published in four volumes. The editor, Wayne W. Frenier, FNACE, provides an extensive introduction to each volume, offering the reader a thorough mix of history, theory, and engineering techniques and methods for addressing scale.

Volume 1: Introduction to Equipment Subject to Inorganic Scale

Volume 2: Current Mechanisms for Understanding Inorganic Scale Formation and Deposition

Volume 3: Chemistry and Application of Scale Inhibitors

Volume 4: Alternative Methods of Scale Control 

This fourth volume, "Alternative Methods of Scale Control," reviews methods for controlling inorganic scale that provide alternatives to chemical SI methods or those that may be used with SIs to enhance management for an entire connected system. The first sections (1 and 2) describe non-chemical methods such as anti-scaling surfaces and electronic methods for reducing scale deposition.
The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

Product Number: 37636-POD
ISBN: 978-1-57590-369-9
Author: Roger Francos
$150.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

In The Corrosion of Duplex Stainless Steels, author Roger Francis reviews various duplex alloy compositions, mechanical properties, and design stresses for vessels and pipes to various codes. He also covers the basics of welding duplex alloys, both to themselves and to other alloys, and their corrosion resistance.

Of most importance, the book looks at a variety of types of corrosion that may affect DSSs in service, presenting the available data and, in some cases, how to avoid problems.

2018 NACE, 256 pages, 8 x 10" trim size, color, perfect bound.

 

Corrosion of Duplex Stainless Steels

Download the free white paper summary of this title to see specific areas of focus and discussion

Picture for 99264 SOLVING CORROSION PROBLEMS AT THE NEA
Available for download

99264 SOLVING CORROSION PROBLEMS AT THE NEA BELLINGHAM MASSACHUSETTS CARBON DIOXIDE RECOVERY PLANT

Product Number: 51300-99264-SG
ISBN: 99264 1999 CP
Author: T. R. DeHart, Dr. DA. Hansen, C.L. Mariz, Dr. J. G. McCullough
$20.00
Picture for The Development of a New Accelerated Corrosion Test Method Using Controlled Relative Humidity
Available for download

The Development of a New Accelerated Corrosion Test Method Using Controlled Relative Humidity

Product Number: 51323-19475-SG
Author: Alexander Lilly, Mirella Vargas, Erica Macha, Dr. Steven Kopitzke, James Dante, Dr. Victor Rodriguez-Santiago
Publication Date: 2023
$20.00

Hexavalent chromium is utilized for the purpose of providing corrosion inhibition on many DoD assets in the form of surface treatments and primers. However, hexavalent chromium is also a known carcinogen and environmental toxin. As a result, processes which involve the application of hexavalent chromium will likely face increased regulation in the future.
Pipeline Coatings

Pipeline Coatings

Product Number: 37616-POD
ISBN: 978-1-57590-335-4
Author: Y. Frank Cheng
$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.


2017 NACE, 7" x 9", soft cover, 264 pages
Picture for Benchmarking International Cathodic Protection and Alternating Current Mitigation Standards to Determine Suitable Protection Criteria
Available for download

Benchmarking International Cathodic Protection and Alternating Current Mitigation Standards to Determine Suitable Protection Criteria

Product Number: MECC23-20206-SG
Author: Craig Botha
Publication Date: 2023
$20.00

The past 20 years in the field of Cathodic Protection (CP) have ushered in the distinct shift from the assessment of conventional Direct Current (DC) corrosion mechanisms to the more complex world of electrochemistry influenced by Alternating Current corrosion mechanisms. In fact, traditional assessment of CP protection levels without taking cognizance of the AC interference on a structure can have catastrophic consequences for pipeline operators. The most common misnomer over the past 20 years has been the idea that a pipeline under suitable levels of CP cannot corrode in a High Voltage Powerline Right of Way.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support