Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
2035 total products found.
Picture for Behavior of Steels and Alloys in Concentrated Sulphuric Acid under Different Flow Regimes – New Pers
Available for download

51316-7610-Behavior of Steels and Alloys in Concentrated Sulphuric Acid under Different Flow Regimes – New Perspectives

Product Number: 51316-7610-SG
ISBN: 7610 2016 CP
Author: Slawomir Kus
Publication Date: 2016
$20.00
Picture of Industrial Water Treatment: New Trends, Challenges and Solutions (E-book)
Available for download

Industrial Water Treatment: New Trends, Challenges and Solutions (E-book)

Product Number: 37628-E
ISBN: 978-1-57590-357-6
Author: Edited by Zahid Amjad and Tao Chen
Publication Date: 2017
$135.00

Industrial Water Treatment & Underdeposit Corrosion symposia.   Formation & inhibition of scale-forming salts. Corrosion & control in industrial water systems. C. Scale, inhibition, challenges & limitation oil & gas. 2017
Picture for Lab-Accelerated Simulation and Maximum Damage Size Estimation of Atmospheric Corrosion of Stainlesss
Available for download

51315-5531-Lab-Accelerated Simulation and Maximum Damage Size Estimation of Atmospheric Corrosion of Stainlesss Steel Compressor Blades Exposed to Marine Environments

Product Number: 51315-5531-SG
ISBN: 5531 2015 CP
Author: Jayendran Srinivasan
Publication Date: 2015
$20.00
Picture for A Review of Various Guidelines for Predicting Solid Particle Erosion with Computational Fluid Dynamics Codes
Available for download

A Review of Various Guidelines for Predicting Solid Particle Erosion with Computational Fluid Dynamics Codes

Product Number: 51320-15105-SG
Author: G.G. Chochua, M. Parsi, Y. Zhang, J. Zhang, T.A. Sedrez, S. Karimi, F. Darihaki, J. Edwards, H. Arabnejad, M. Agrawal, A. Asgharpour, R.E. Vieira, P. Zahedi, E. Gharaibah, S.A. Shirazi
Publication Date: 2020
$20.00

Solid particle erosion is one of the key issues affecting operational reliability and the cost of tools and equipment in the oil and gas industry. In a particular erosive environment, the extent to which erosion occurs depends on many factors, such as flow conditions, fluid properties, wall material, and particle properties. As a result, it is difficult to investigate the effects of all of these factors using experimental methods. One comprehensive alternative, however, is to use computational fluid dynamics (CFD), which can provide the analyst with a great deal of information about the phenomenon, such as where erosion occurs as well as its severity. Of course, when using any CFD-based erosion prediction method, care must be taken when selecting appropriate meshing practices, solution parameters, and sub-models.
Best practices and guidelines for solid particle erosion modeling using CFD are described. In addition to discussing many parameters that should be considered when using CFD to predict solid particle erosion, the effects of many of these parameters and sub-models within the CFD codes are also discussed with several examples comparing CFD results to available experimental data. This paper can serve as a first step toward developing a comprehensive guideline for the industrial modeling of erosion phenomena and to help engineers improve the accuracy of erosion wear predictions.
Picture for The Effects Of Different Blast Abrasives On The Performance Of Liquid-Applied Epoxy Pipeline Coatings
Available for download

The Effects Of Different Blast Abrasives On The Performance Of Liquid-Applied Epoxy Pipeline Coatings

Product Number: 51322-17806-SG
Author: Haralampos Tsaprailis, Shan (Sherry) Rao
Publication Date: 2022
$20.00

Proper surface preparation to create sufficient adhesion of a coating over the substrate is fundamentally important in the long-life performance of a protective coating. Abrasive blast cleaning provides a fast and well-established method of surface preparation, which utilizes energy generated by an air supply to deliver a mass of abrasive particles at certain speeds and volumes to impact the steel resulting in a cleaned surface. The method not only cleans the surface to remove rust, scale, paint, and similar contaminations, but also roughens the surface to produce mechanical and chemical adhesion for a coating. Therefore, abrasive blasting is the preferred method for preparing steel for the application of high-performance coatings and routinely used for achieving the required surface conditions prior to a coating work.
Picture for Some Effects Of Surface Finish And LWR Environment On Environmentally-Assisted Crack Initiation In Alloy 182
Available for download

Some Effects Of Surface Finish And LWR Environment On Environmentally-Assisted Crack Initiation In Alloy 182

Product Number: ED22-18329-SG
Author: M. Vankeerberghen, R.-W. Bosch, A. Dinu, M. Grimm, A. Hojná, P. J. Meadows, R. Novotny, F. Perosanz, Z. Que, S. Ritter, F. Scenini, A. Toivonen, L. Volpe, B. Zajec
Publication Date: 2022
$20.00

Environmentally-assisted cracking (EAC) of nickel-base alloys has been observed in the primary coolant of light water reactors (LWRs). One of the main issues is primary water stress corrosion cracking (PWSCC) of Alloy 182 which has been a concern for a long time. For assumed or existing defects, disposition curves (crack growth rate as function of stress intensity factor) are available.
Picture for Effect of oxygen in back purging gas on localized corrosion resistance of duplex welded joints with and without post-weld surface treatment
Available for download

Effect of oxygen in back purging gas on localized corrosion resistance of duplex welded joints with and without post-weld surface treatment

Product Number: 51323-19445-SG
Author: Tatiana C. Almeida, Rogaciano M. Moreira, Merlin C. E. Bandeira, Susana L. Díaz, Drielly L. Souza, Brenda C. S. Cardozo, Rafaela A. Posse, Oscar R. Mattos, Flávia M. F. Guedes, Ilson P. Baptista, Petronio Zumpano Junior, Ricardo R. Marinho, Aline L.S. Gomes, Marcelo F. Motta, Hélio C. Miranda
Publication Date: 2023
$20.00

Duplex stainless steel is widely used in Brazilian offshore pipelines since the pre-salt environment is under high corrosion scenario. Welding processes are often used in applications involving this steel. However, in general, welding imposes a reduction in the corrosion resistance of stainless steels.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support