Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
114 total products found where category is "Books".
Crude Unit Corrosion Guide - A Complete How-To Guide, 3rd edition

Crude Unit Corrosion Guide - A Complete How-To Guide, 3rd edition

Product Number: 37612-POD
ISBN: 978-1-57590-330-9
Author: Joerg Gutzeit
$127.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Written for Plant Operators, Process Engineers, Metallurgists, Maintenance Engineers, Inspectors, and all others who deal with crude unit corrosion and fouling. Based on industrial experience and reflects Industry’s consensus 2016 NACE, API
Picture for The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers
Available for download

The Corrosion of Duplex Stainless Steels: A Practical Guide for Engineers

Product Number: 37636-pdf
ISBN: 978-1-57590-459-7
Author: Roger Francis
Publication Date: 2018
$150.00

Since the 1980s, a range of duplex stainless steels (DSSs) has been developed that have higher alloy content, and therefore greater corrosion resistance and strength. The commonly used DSSs have good corrosion resistance in a wide range of environments and excellent resistance to stress corrosion cracking (SCC). Their high strength and hardness also gives them excellent resistance to both erosion corrosion and cavitation. There are also cast versions of many of the duplex compositions and these have seen extensive use for pumps, valves, and other equipment.
Picture for MTI 17 Corrosion Under Heat Transfer Conditions

Corrosion Under Heat-Transfer Conditions, MTI Publication No. 17

Product Number: 37911
ISBN: MTI 17 Corrosio
$26.00
Picture for Practical Manual of Biocorrosion and Biofouling

Practical Manual of Biocorrosion and Biofouling for the Industry, English Edition

Product Number: 38251
ISBN: 0952711591
Author: By Hector A. Videla
$30.00
Picture for Industrial Water Treatment New Trends, Challenges, and Solutions
Available for download

Industrial Water Treatment New Trends, Challenges, and Solutions

Product Number: 37628-pdf
ISBN: 978-1-57590-457-3
Author: Edited by Zahid Amjad and Tao Chen
$135.00

This book covers the scientific and technological perspectives of industrial water treatment. The book’s 27 chapters are divided into three sections.

Section A (Chapters 1 through 12) deals with the formation and inhibition of scale-forming salts—including calcium carbonate, calcium sulfate dihydrate, calcium oxalate, silica, and calcium phosphate—as well as the removal of impurities and the dispersion and stabilization of suspended matter in cooling and desalination systems.

Section B consists of four chapters and focuses on the fundamentals of corrosion and its control in industrial water systems.

Section C comprises 11 chapters (Chapters 17 through 27) and deals with scale formation, inhibition, challenges, and limitation in the oil and gas industry. The discussions cover conventional scale to exotic scale (e.g., iron sulfide) from conventional and unconventional resources, such as scaling in shale gas field. 

This book is intended primarily for scientists, researchers, technologists, and engineers working in the water treatment and water purification industries around the globe. Researchers in other industries—such as pharmaceutical, medical, and food—who are involved in the use of high-purity water, as well as those in academia, will also find useful information here.
Picture for Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair-2nd Ed

Corrosion of Steel in Concrete: Prevention, Diagnosis, and Repair, 2nd edition

Product Number: 38604
ISBN: 9783527331468
Author: Luca Bertolini, by Bernhard Elsener, Pietro Pedeferri, Elena Redaelli, Rob B. Polder
Publication Date: 2014
$190.00

 

Corrosion of steel in concrete.  Mechanisms. Practical consequences. Carbonation and chlorides. Hydrogen embrittlement. Diagnosis. Monitoring. Repair. European standards. Design and maintenance of concrete structures.  Knowledge, tools, and methods.  2nd edition 2014 Wiley
Picture for Inspection of Coatings & Linings: A Handbook

The Inspection of Coatings and Linings: A Handbook of Basic Practice for Inspectors, Owners and Specifiers

Product Number: 38311
ISBN: 1889060119
Author: Edited by B.R. Appleman, R.W. Drisko, and J.M. Neugebauer
Publication Date: 1998
$195.00

Information, procedures, standards & practices for inspection of coatings and linings on industrial structures. Provides coatings inspectors the resources to perform inspections. Referencees, Appendices, Glossary, Index. 1998 SSPC 
Picture for Technology for Chemical Cleaning of Industrial Equipment - Second Edition
Available for download

Technology for Chemical Cleaning of Industrial Equipment - Second Edition

Product Number: 37634-pdf
ISBN: 978-1-57590-458-0
Author: Wayne W. Frenier
Publication Date: 2018
$148.00

This book presents new developments that have affected the commercial use of chemicals and devices to clean industrial equipment. This second edition will emphasize the mechanisms of important cleaning processes and solvents and will give an overview of the science and technology of the formation and removal of fouling deposits in the industrial equipment environment. It is directed to a general technically trained audience, with emphasis placed on the basic chemical and mechanical principles of industrial cleaning (IC).
Picture of Industrial Water Treatment: New Trends, Challenges and Solutions (E-book)
Available for download

Industrial Water Treatment: New Trends, Challenges and Solutions (E-book)

Product Number: 37628-E
ISBN: 978-1-57590-357-6
Author: Edited by Zahid Amjad and Tao Chen
Publication Date: 2017
$135.00

Industrial Water Treatment & Underdeposit Corrosion symposia.   Formation & inhibition of scale-forming salts. Corrosion & control in industrial water systems. C. Scale, inhibition, challenges & limitation oil & gas. 2017
Picture for Standards and Best Practice for a Protective Coatings Inspector

Standards and Best Practice for a Protective Coatings Inspector

Product Number: 37689-POD
ISBN: 978-1-57590-497-9
$200.00

Inspection is considered as insurance for the purpose of preventing premature coating failures. This book covers many of the aspects of inspections required to assure quality coating work. it also offers multiple application examples including storage tanks, concrete floors, nonskid coatings, surface prep, inspection equipment, and more.

Standards and Best Practice for a Protective Coatings Inspector is a comprehensive guide to all the processess involved in ensuring the safety and longetivity of coatings and the assets they protect.

2024 AMPP, perfect bound, 490 pages, color

 
Picture of The Nalco Guide to Cooling Water Systems Failure Analysis, 2nd edition

The Nalco Guide to Cooling Water Systems Failure Analysis, 2nd edition

Product Number: 38602
ISBN: 9780071803475
Author: Nalco Chemical Company
Publication Date: 2014
$125.00

 

 

Failure analysis for cooling water systems.  Causes of cooling system failure. Corrections.  Prevention.  Design. Operation. Materials. Waterside corrosion, cracking, mechanical damage.  Case histories. 2014 McGraw Hill

 
Standards and Best Practice for Surface Preparation of Steel Substrates

Standards and Best Practice for Surface Preparation of Steel Substrates

Product Number: PB-C0M05-POD
ISBN: 978-1-57590-416-0
$185.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

The life of a coating depends as much on the degree and quality of surface preparation as on the selected coating system, because most coating failures can be attributed to inadequate surface preparation or lack of coating adhesion.

In this Standards and Best Practice for Surface Preparation of Steel Substrates reference book, students and technicians are provided with the basics of numerous surface preparation techniques, pertinent technical standards, and numerous case studies on how to apply the techniques and adhere to the standards.

2021 AMPP, black and white, soft cover, 376 pages.

 

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support