Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

Search and Filter

Toggle Open/Closed
View as
Display per page
98 total products found where category is "Books".
Picture for An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition
Available for download

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition

Product Number: 37657-pdf
ISBN: 978-1-57590-465-8
Author: Ali Morshed
Publication Date: 2020
$150.00

In the eight years since the first edition of this book was published by NACE International, the demand for corrosion management expertise and services (i.e., training, auditing, consultancy, and field implementation) has been growing, both within the hydrocarbon and the non-hydrocarbon industries.

This latest edition is almost a total revamp of the previous one and greatly benefits from the author’s continuous learning process through his frequent involvement with various oil and gas sectors and different industries as a corrosion management trainer, auditor, and consultant.
Cathodic Protection Survey Procedures, 3rd Edition

Cathodic Protection Survey Procedures, 3rd Edition

Product Number: 37614-POD
$137.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

MUST HAVE CLASSIC: This book was written as a helpful instruction for Cathodic Protection Testers, Technicians and Technologists and others who conduct tests on cathodic protection (CP) systems for on-shore structures.

While there are several texts on the theory and application of CP, there are no books that describe these applicable CP field tests in detail. This book presents a step by step procedure on rectifier or thermoelectric generator adjustments, inspection and basic troubleshooting, structure-to-electrolyte potential measurements, current measurements; diagnostic testing; adjustive surveys; commissioning surveys; close interval potential surveys, stray current interference testing, electrical isolation testing, road/railroad cased crossings, AC voltage testing, soil resistivity measurements, and CP tests on well casings, aboveground storage tanks and underground tanks. Included under each of these subjects is a list of the tools and equipment or safety equipment needed, precautions to be followed, the step by step procedure, an analysis of the test results and applicable references.

The contents of the book are directed to those who are new to the CP arena, others who do not regularly complete all of these CP field tests, and as a refresher to experienced CP personnel.

2016 by NACE International, 7" x 9", perfect bound, 342 pages.
Picture for SSPC Pocket Guide to Coating Information
Available for download

SSPC Pocket Guide to Coating Information

Product Number: PB-01301-pdf
ISBN: 978-1-57590-466-5
Author: SSPC
$30.00

The SSPC Pocket Guide to Coating Information is a handy reference to those charts, standards, and calculations most frequently needed during surface preparation and coating application.

Chapters consist of topics such as soluble salts, concrete coating, inspection, corrosion basics, and more.
Picture of An Introduction to Corrosion Management in Industry (E-book)
Available for download

An Introduction to Corrosion Management in Industry (E-book)

Product Number: 37633-E
ISBN: 978-1-57590-364-4
Author: Ali Morshed
Publication Date: 2017
$130.00

Corrosion management for any non-hydrocarbon industrial sector where corrosion is a threat.  For engineers involved in corrosion, maintenance, reliability, inspection, CP and coating. Owners, operators and managers. 2017 NACE
Picture for Microbiologically Influenced Corrosion (MIC) in the Upstream Oil & Gas Sector

Microbiologically Influenced Corrosion (MIC) in the Upstream Oil & Gas Sector

Product Number: 37674-POD
ISBN: 978-1-57590-424-5
Author: Ali Morshed
$125.00

NEW TITLE AVAILABLE NOW!! The main objective for Dr. Ali Morshed's new book, A Practical Guide to Microbiologically Influenced Corrosion (MIC) in the Upstream Oil & Gas Sector, was to produce a practical MIC guide to facilitate the identification, monitoring, assessment, and control of bacterial activity and MIC that might arise within assets associated with the upstream oil and gas sector.

“Practical” refers to content that can be readily related to various bacterial and MIC scenarios, which are likely to arise for any upstream operator and (a content which) can be easily used to resolve, rectify, or improve such MIC scenarios.


In brief, this book has been written to further help and facilitate bacterial and MIC troubleshooting for the operators and asset owners concerned.

Five relevant and informative case studies are also included.

2023 AMPP, 114 pgs

 
Field Guide for Managing Iron Sulfide-Chapter 2: What is Black Powder and What are the Health and Safety Concerns
Available for download

Field Guide for Managing Iron Sulfide-Chapter 2: What is Black Powder and What are the Health and Safety Concerns

Product Number: 37642-Ch02
$55.00

AMPP's title Field Guide for Managing Iron Sulfide (Black Powder) within Pipelines or Processing Equipment has become an increasingly vital tool for pipeline maintenance and production in the oil and gas industry.

Written to provide guidance and instruction to corrosion control professionals and operations personnel, it provides straightforward, practical guidance regarding what is “black powder,” and why it may be a concern.

Chapter 2, "What is Black Powder and What are the Health and Safety Concerns," provides a full overview of the numerous forms of iron sulfide, the most distinctive component of black powder.

2019 AMPP, color, 23 pages
Picture for Corrosion Engineer's Reference Guide - Fourth Edition
Available for download

Corrosion Engineer's Reference Guide - Fourth Edition

Product Number: 37608-pdf
ISBN: 978-1-57590-450-4
Author: Robert Baboian
Publication Date: 2016
$170.00

MUST HAVE CLASSIC: The objective of the NACE Corrosion Engineer's Reference Book, published in 2016, is to provide scientists, engineers, technologists, and students with useful and important information and data on corrosion investigation and control.  

This handbook starts out with a comprehensive glossary that includes standard terminology and acronyms related to corrosion. It also contains more than 325 tables, graphs, and charts. 

2016 NACE, 570 pages
Corrosion Basics-Chapter 2: Electrochemistry of Corrosion

Corrosion Basics-Chapter 2: Electrochemistry of Corrosion

Product Number: 37630-Ch02
$125.00

Much of the experience and many of the workable solutions developed in one area of corrosion work can be used to improve the control procedures of another area. While most people work in only one area of this total discipline, there is always the possibility that a shift in responsibilities or interest brings one to work in a completely different area of corrosion prevention and control.

AMPP's Corrosion Basics: An Introduction is renowned inside (and out of) the corrosion industry for its general coverage of the ever-increasing field of corrosion control. 

Chapter 2, "Electrochemistry of Corrosion," of Corrosion Basics is fundamental to an understanding of why and how metals corrode. In fact, the author suggests that the "reader proceed through this chapter carefully, concentrating particularly on learning the component parts of a corrosion cell and its interrelationships."

2018 AMPP, black and white, 75 pages, pdf
Pipeline Coatings

Pipeline Coatings

Product Number: 37616-POD
ISBN: 978-1-57590-335-4
Author: Y. Frank Cheng
$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.


2017 NACE, 7" x 9", soft cover, 264 pages
An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition--POD

Product Number: 37657-POD
ISBN: 978-1-57590-407-8
Author: Ali Morshed
Publication Date: 2020
$155.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

In the eight years since the first edition of this book was published by NACE International, the demand for corrosion management expertise and services (i.e., training, auditing, consultancy, and field implementation) has been growing, both within the hydrocarbon and the non-hydrocarbon industries.

This latest edition is almost a total revamp of the previous one and greatly benefits from the author’s, Ali Morshed, continuous learning process through his frequent involvement with various oil and gas sectors and different industries as a corrosion management trainer, auditor, and consultant.

2020 NACE, softbound, B&W, 150 pages, 6 x 9 trim size.
The Marine Coatings User's Handbook

The Marine Coatings User's Handbook

Product Number: 37596-POD
ISBN: 978-1-57590-253-1
$128.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

For personnel involved in new-build and maintenance painting of ships.  From shipyards to drydocks and coating repairs by ship’s crews while under-way. Comparisons of coatings. Speicial requirements.  Inspection. Equipment. 

2012 NACE 
NACE Corrosion Engineer's Reference Guide, Fourth Edition

NACE Corrosion Engineer's Reference Guide, Fourth Edition

Product Number: 37608-POD
ISBN: 978-1-57590-321-7
$170.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

MUST HAVE CLASSIC: The objective of the NACE Corrosion Engineer's Reference Book, published in 2016, is to provide scientists, engineers, technologists, and students with useful and important information and data on corrosion investigation and control.  

This handbook starts out with a comprehensive glossary that includes standard terminology and acronyms related to corrosion. It also contains more than 325 tables, graphs, and charts. 

2016 NACE, 570 pages, 5 x 8" trim size, perfect bound

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support