Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
114 total products found where category is "Books".
Picture for Corrosion 93 Plenary and Keynote Lectures

CORROSION/93 Plenary and Keynote Lectures--A 50-Year History of Corrosion Prevention and Control

Product Number: 37362
ISBN: 1877914495
Author: Edited by R.D. Gundry
$10.00
Galvanic Corrosion: A Practical Guide for Engineers, 2nd Edition

Galvanic Corrosion: A Practical Guide for Engineers, 2nd Edition

Product Number: 37625-POD
ISBN: 978-1-57590-353-8
Author: Roger Francis
$105.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Galvanic corrosion occurs when two dissimilar metals are electrically coupled in an eletrically conducting, corrosion fluid. Under these conditions, the rate of corrosion of one member of the couple is increased above that which would occur if the metal were exposed in isolation.

The author, Roger Francis, provides answers for common questions concerning galvanic corrosion and how to not only stop it, but prevent it.

2017 NACE, 8 x 10" trim size, softbound, 150 pages.
Corrosion Control in Petroleum Production, Third Edition

Corrosion Control in Petroleum Production, 3rd Edition

Product Number: 37646-POD
ISBN: 978-1-57590-389-7
Author: Robert J. Franco & Timothy Bieri
$148.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas.

The book provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement.

The authors, Robert Franco and Tim Bieri, have distilled over 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference.

Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

 2020 NACE, 536 pages, 6 x 9" trim size, perfect bound, color
Cathodic Protection Survey Procedures, 3rd Edition

Cathodic Protection Survey Procedures, 3rd Edition

Product Number: 37614-POD
$137.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

MUST HAVE CLASSIC: This book was written as a helpful instruction for Cathodic Protection Testers, Technicians and Technologists and others who conduct tests on cathodic protection (CP) systems for on-shore structures.

While there are several texts on the theory and application of CP, there are no books that describe these applicable CP field tests in detail. This book presents a step by step procedure on rectifier or thermoelectric generator adjustments, inspection and basic troubleshooting, structure-to-electrolyte potential measurements, current measurements; diagnostic testing; adjustive surveys; commissioning surveys; close interval potential surveys, stray current interference testing, electrical isolation testing, road/railroad cased crossings, AC voltage testing, soil resistivity measurements, and CP tests on well casings, aboveground storage tanks and underground tanks. Included under each of these subjects is a list of the tools and equipment or safety equipment needed, precautions to be followed, the step by step procedure, an analysis of the test results and applicable references.

The contents of the book are directed to those who are new to the CP arena, others who do not regularly complete all of these CP field tests, and as a refresher to experienced CP personnel.

2016 by NACE International, 7" x 9", perfect bound, 342 pages.
Picture for Corrosion of Stainless Steels 2nd Edition

Corrosion of Stainless Steels, Second Edition

Product Number: 37796
ISBN: 9780471007920
Author: By A. John Sedriks
$202.00
Pipeline Coatings

Pipeline Coatings

Product Number: 37616-POD
ISBN: 978-1-57590-335-4
Author: Y. Frank Cheng
$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.


2017 NACE, 7" x 9", soft cover, 264 pages
Picture for Corrosion Basics An Introduction 3rd Edition
Available for download

Corrosion Basics An Introduction, 3rd Edition

Product Number: 37630-pdf
ISBN: 978-1-57590-444-3
Author: Pierre Roberge
Publication Date: 2018
$248.00

This book provides an extensive update on the second edition with general coverage of the wide field of corrosion control. It is designed to help readers being initiated into corrosion work and presents each corrosion process or control procedure in the most basic terms. Since the first edition was published in 1970, there have been major advances and changes in the technologies used to combat corrosion damage. 

2018 NACE, Third Edition, 822 pages
An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition--POD

Product Number: 37657-POD
ISBN: 978-1-57590-407-8
Author: Ali Morshed
Publication Date: 2020
$155.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

In the eight years since the first edition of this book was published by NACE International, the demand for corrosion management expertise and services (i.e., training, auditing, consultancy, and field implementation) has been growing, both within the hydrocarbon and the non-hydrocarbon industries.

This latest edition is almost a total revamp of the previous one and greatly benefits from the author’s, Ali Morshed, continuous learning process through his frequent involvement with various oil and gas sectors and different industries as a corrosion management trainer, auditor, and consultant.

2020 NACE, softbound, B&W, 150 pages, 6 x 9 trim size.
The Marine Coatings User's Handbook

The Marine Coatings User's Handbook

Product Number: 37596-POD
ISBN: 978-1-57590-253-1
$128.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

For personnel involved in new-build and maintenance painting of ships.  From shipyards to drydocks and coating repairs by ship’s crews while under-way. Comparisons of coatings. Speicial requirements.  Inspection. Equipment. 

2012 NACE 
Picture for MTI 47 Corrosion Testing of Iron & Nickel-based All

Corrosion Testing of Iron- and Nickel-Based Alloys, Part 2: Test Data, MTI Publication No. 47

Product Number: 37803
ISBN: 1576980006
Author: By Thomas F. Degnan (Introduction by Warren I. Pollock)
$50.00
Picture for The Fundamentals of Cleaning & Coating Concrete

Fundamentals of Cleaning and Coating Concrete, The

Product Number: 38363
ISBN: 1889060615
Author: Edited by Randy Nixon and Dr. Richard Drisko
$125.00
Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines

Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines

Product Number: 37610-POD
ISBN: 978-1-57590-328-6
Author: Richard Eckert
$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This book by renowned expert Richard Eckert is intended to help oil and gas pipeline operators, corrosion professionals, integrity experts and risk management practitioners assess, control, and manage the effects of internal corrosion on pipeline systems, thus improving the safety, reliability and integrity of their operations.

While the focus of this book is on pipelines, the content is broadly applicable to upstream equipment, processing facilities, mid-stream pipelines, liquid and gas storage assets, and delivery/distribution assets.

2016 NACE, 7 x 9" trim size, softbound, 368 pages.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support