AMPP Store - Products tagged with 'ampp annual conference + expo'

Available for download

Controlling Hydrogen Sulfide Using Acrolein in Produced Water and Mixed Phase Production

Product Number: 51323-19555-SG

Author: Miles Horton, Cody May, Ya Lui, Gil Guerrero, Zhengwei Liu, Brandon Stephens

Publication Date: 2023

$20.00

Acrolein, or 2-propenal, is a small unsaturated aldehyde with the chemical formula C3H4O. It is a liquid at room temperature and has a number of uses for oilfield and agricultural applications. This paper discusses the use of acrolein for control of dissolved sulfide in oilfield fluids, both produced water and mixed production.

Available for download

Correlating physical chemistry with interfacial properties: Effect of salinity on the partitioning, distribution and performance of a quaternary amine corrosion inhibitor

Product Number: 51323-19142-SG

Author: Richard Barker, Joshua Owen, Richard C. Woollam, Yasmin Hayagheib, Raeesa Bhamji, Jeanine Williams, William H. Durnie, Mariana C. Folena, Abubaker Abdelmagid, Hanan Farhat

Publication Date: 2023

$20.00

Corrosion inhibitors provide a cost effective method for internal corrosion control of carbon and low alloy steel infrastructure within the oil and gas industry. The correct selection and validation of inhibitors is essential to ensure successful, safe and reliable operation of infrastructure. Corrosion inhibitors used in upstream oil and gas production are characteristic of surfactant molecules, which adsorb at the metalsolution interface, creating a dynamic physical barrier that reduces electrochemical dissolution.

Available for download

Correlation Studies between Outdoor Exposure and Accelerated Laboratory Corrosion Tests in Cold Alaskan Climate

Product Number: 51323-19384-SG

Author: Raghu Srinivasan, Tyler Cushman

Publication Date: 2023

$20.00

Atmospheric corrosion of metal alloys in cold environments is assumed to be negligible. However, studies in the Arctic and Antarctic regions have shown significant corrosion damage when exposed to cold conditions. While thermodynamically this is correct, other factors in such environments can be responsible for driving corrosion.

Available for download

Corrosion & Mechanical Properties of Nickel Based Alloy 825 Explosion Welded Plates for H2S Service

Product Number: 51323-19123-SG

Author: O. Sarrat, H. Alves, J. Botinha, P. Maas

Publication Date: 2023

$20.00

The total project study focused on six suction and discharge drums. Each of them was built with twohemispherical heads and a number of shells. The H2S service and Stress Corrosion Cracking (SCC) from this specific oil and gas field required the equipment to be cladded with Alloy 825 to protect them from corrosion.

Available for download

Corrosion assessment of additively manufactured stainless steel 316L in 3.5 wt% NaCl

Product Number: 51323-19424-SG

Author: Deeparekha Narayanan, Ryan Brooks, Matthew Vaughan, Bilal Mansoor, Ibrahim Karaman, Raymundo Case, Homero Castaneda

Publication Date: 2023

$20.00

Additive manufacturing (AM) techniques are being studied widely for producing intricately shaped parts and structural components with superior mechanical properties and corrosion resistance. Several detailed studies have been performed on selective laser melted (SLM) stainless steel 316L (SS316L) alloys which describe the effects of process parameters, anisotropy and heat treatments on the corrosion behavior of these alloys. These studies have revealed various pit morphologies and passive films formed on the alloys in various solutions.

Available for download

Corrosion Assessment to Extend Vessel Continuous Operation Subsequent to Depleted Anodes Indications

Product Number: 51323-18992-SG

Author: Muntathir M. Al-Jumaah, Usman Shahzad, Mamdouh H. Hadi

Publication Date: 2023

$20.00

In gas-oil separation plants (GOSPs), multiphase crude is separated, degassed and then dehydrated before being shipped to stabilization plants for further processing. Typically, in ageing oil fields, the crude is accompanied by large volumes of formation water that is separated in GOSPs using three-phase production traps, which are large horizontal vessels, using a gravimetric separation process where water collects and settles at the vessel’s lower part.

Available for download

Corrosion behavior assessment and comparison of UNS S31603 stainless steel, nickel-titanium shape memory alloy, and Al2Cr5Cu5Fe53Ni35 high-entropy alloy in biomedical environments

Product Number: 51323-19413-SG

Author: Olivia Esmacher, Deeparekha Narayanan, Marcelo Paredes, Homero Castaneda

Publication Date: 2023

$20.00

Materials selection in the biomedical sector has become a critical area of research, and the care and treatment of patients need to be continuously improved as technology advances. There is a broad range of such applications for metals in the current state of the industry, including dentistry and orthodontics, surgical tools, implants, stents, and bone staples and screws. Each of these applications entails a unique environment within the human body, and as new alloys are developed, it is crucial to understand their degradation behavior and response when exposed to the harsh conditions found throughout biomedical applications.

Available for download

Corrosion Behavior of Fe-Cr-Ni Alloys in Molten NaNO3-KNO3 Salt Mixture and Vapor

Product Number: 51323-18909-SG

Author: Qingyang Liu, Frederick Pessu

Publication Date: 2023

$20.00

The serious challenges for harvesting solar energy from solar power tower is the inherent intermittence caused by altering of day and night and by the weather event changes, posing a significant threat to the continuous supply of solar electricity. The most promising solution explored by the researchers during the last few decades would be integrating the thermal storage system with the Concentrated Solar Power Plant (CSP) to stabilise and provide the high-quality electrical energy at night or anytime without sufficient solar irradiance. Typical thermal energy storage system enables the CSP plants to store solar energy by heating the sensible storage medium, like molten nitrate salt in a hot tank.

Available for download

Corrosion Behavior of Martensite-Based Stainless Steels in Chloride Solutions Saturated with CO2 Containing Impurity Gases

Product Number: 51323-18908-SG

Author: Yuichi Kamo, Kenichiro Eguchi, Hiroyuki Takai

Publication Date: 2023

$20.00

Carbon Capture and Storage (CCS) is a countermeasure for the global warming issue, and the number of CCS projects has increased. One type of CCS is Enhanced Oil Recovery (EOR), in which CO2 is injected into oil or natural gas reservoirs. Because formation water, which usually has a high concentration of chloride, exists at the bottom of these reservoirs, the injection tubing will suffer corrosion when the formation water flows back to the tubing. Stainless steels have been applied as tubing materials for Oil Country Tubular Goods (OCTG), and showed excellent corrosion resistance under high temperature and high CO2 pressure conditions. Martensite-based stainless steels bearing 13 mass% Cr to 17 mass% Cr are one of these tubing materials and are also expected to be used in CO2 injection tubing.

Available for download

Corrosion Challenges On Tank Bottom Plate

Product Number: 51323-19387-SG

Author: Ameer Hamza, Rakan M Samman

Publication Date: 2023

$20.00

Subsequent failure due to corrosion, particularly on storage tanks bottom plates for molten sulphur tanks, is one of the main factors upsetting any production facilities.

Available for download

Corrosion Inspection and Evaluation of Roadway Metal Railings with Deep Learning Technique

Product Number: 51323-19300-SG

Author: Siyu Lin, Fujian Tang, Ji Dang, Zhibin Lin

Publication Date: 2023

$20.00

As a protective facility to ensure the safety of citizens or to guide the traffic flow, guardrails are almost
visible everywhere in modern cities. The most commonly used material for roadside guardrail systems
is steel. However, due to the influence of the marine environment, corrosion of roadside steel guardrail
is ubiquitous in coastal cities, which not only damages the appearance and reputation of the city, but
also poses a potential security threat by largely reducing the service-life and strength of the guardrail.

Available for download

Corrosion issues in the conversion of vegetable and waste oils to produce biofuels

Product Number: 51323-19308-SG

Author: Fouad Andari, Jean Kittel, François Ropital, Joana Fernandes, Laure Dodelin

Publication Date: 2023

$20.00

To limit the impact of greenhouse gas emissions on climate change, the use of conventional hydrocarbons needs to be reduced significantly. The global demand for biofuels is thus expected to grow during the present decade. Hydrogenated Vegetable Oil (HVO) is one of the predominant biofuels produced by converting lipidic feedstocks (vegetable oils, animal fats, waste cooking oils, …) through a conventional refinery hydrotreatment (HDT) process.

Products tagged with 'ampp annual conference + expo'

Association for Materials Protection and Performance