AMPP Store - Products tagged with 'ampp annual conference + expo'

Available for download

Screening For Selective Seam Weld Corrosion and Long Seam Anomalies in ERW Pipe Using ILI Data. A Case Study

Product Number: 51323-19476-SG

Author: Bernardo Cuervo, Mark McQueen

Publication Date: 2023

$20.00

On July 8th, 1986, an 8-inch pipeline transporting gasoline ruptured in Mounds View, Minnesota. Vaporized gasoline combined with air and liquid gasoline flowed along neighborhood streets. Approximately 30 minutes later, a vehicle entered the area igniting the gasoline vapor.

Available for download

Selection and Testing of Fusion Bond Epoxy Coating for High Pressure Pipelines with H2S and CO2 Acid Gases

Product Number: 51323-19482-SG

Author: Sameer Ayyar

Publication Date: 2023

$20.00

New gas field expansion will provide offshore facilities to process non-associated gas, where the new
gas gathering system takes non-associated gas from offshore gas wells and transports it through
pipeline to onshore processing plants. The gas is very corrosive due to high levels of H2S and CO2 acid
gases content. Further hydrate control is achieved by injecting mono ethylene glycol (MEG).

Available for download

Selective Degradation and Removal of Silyl-Containing Topcoats from Non-Metallic Substrates using Environmentally Friendly Fluoride Salts

Product Number: 51323-18797-SG

Author: Erick B. Iezzi, Grant C. Daniels

Publication Date: 2023

$20.00

topcoats utilized on the exterior skin of Department of Defense (DoD) aircraft (i.e., fixed and rotary wing) and ground support equipment (GSE) are two-component (2K) polyurethanes (PUs) that are qualified to MIL-PRF-85285 performance requirements. These topcoats are formed from the chemical MARCH reaction of hydroxyl- and isocyanate-functional molecules to generate highly cross-linked polymeric networks that contain carbamate (i.e., urethane) linkages. Formation of these cross-linked networks result in durable coatings with excellent hydrocarbon resistance, mechanical and thermal properties, including resistance to ultraviolet (UV) degradation from sunlight.

Available for download

Selective Dissolution Forming During Sour Testing of Duplex Stainless Steels. Is It Critical?

Product Number: 51323-18834-SG

Author: Christophe Mendibide, Carole Dessolin

Publication Date: 2023

$20.00

According to ISO 15156(1) standard, the acceptability limits of duplex stainless steels for a safe use in exploration and production environments are defined based on the PREN (Pitting Resistance Equivalent Number) of the considered alloy. For a duplex stainless steel with 30 < PREN < 40 (typical of 22%Cr steels), the alloy is acceptable up to a H2S partial pressure of 0.1 bar while this partial pressure can be increased up to 0.2 bar if 40 < PREN < 45 (typical of 25%Cr steels).

Available for download

Solvent-free Vinyl-Ester Lining Systems for Severe Corrosion Protection

Product Number: 51323-19253-SG

Author: Daniel Kessler, Ralph Marcks, Stefanie Dutschke-Wortmann, Christian Dutschke, Iris Zwick

Publication Date: 2023

$20.00

Handling, storing and processing of hazardous chemicals are important tasks not only in chemical industry globally but also in many other production facilities, e.g. automotive, energy, pharmaceutical. Different types of resistant linings are used prevent corrosion of plants and equipment, to protect against possible leakages, to prevent unforeseen downtimes and to guarantee environmental protection. Depending on the individual chemical, thermal and mechanical conditions within the local production environment different materials are used as internal linings in process or storage vessels, as floorings, as sealing layers, e.g. Epoxy Resins (EP), Polyurethane Resins (PU), Polyester Resins (UP), Polymethylmethacrylic Resins (PMMA), Furanic or Phenolic Resins (FU / PF).

Available for download

Sometime More Is Just More: THPS Biocide Laboratory Kill Study on Wildtype Sulfate Reducing Bacteria.

Product Number: 51323-18858-SG

Author: J. Fajt

Publication Date: 2023

$20.00

Tetrakis(hydroxymethyl)-phosphonium Sulfate (THPS) is a very common active ingredient in oil and gas biocides. While product labels provide broad guidelines application dosing the lowest effective dose of THPS is difficult to determine. Site water chemistry and bacteria biology variability will affect the dose need to achieve the desired level of bacteria population control. For these reasons biocide dose response studies are commonly conducted on solutions containing bacteria to determine the effect of treatments before application.

Available for download

Splash Zone Coating Performance after Long Term Offshore Exposure

Product Number: 51323-19143-SG

Author: Anette Pedersen, Kari Lønvik, Erik Krogstad Sverre, Lars Lichtenstein, Anders W. B. Skilbred, Andreas Løken

Publication Date: 2023

$20.00

Following the worlds growing need for sustainable energy solutions, offshore wind farms are important contributions to the generation of renewable energy. One key element for a profitable and sustainable operation of offshore wind farms is that the installations are protected with the most cost-effective corrosion protective solution for the entire lifetime. In practice, this means that today’s projects are planned with an estimated lifetime of a minimum of 25 years without major maintenance of the corrosion protective solution.

Available for download

Spring Failure at North Sea Valve (NSV)

Product Number: 51323-19367-SG

Author: Matheus Biava, Gustavo Brandolin, Nathalia Mota

Publication Date: 2023

$20.00

The function of the NSV (hose-end non-return valve, first used in the North Sea) is to create a safety
connection between the FPSO and the shuttle tanker during mooring and oil transfer. This connection
is made using the Loading System at the Bow of the tanker vessel through the BLS (Bow Loading
System). After carrying out all necessary checklist and communicating with the tanker, the marine crew
from FPSO start to pay the offloading mooring cable that connects on Dynamic Positioning Shuttle
Tanker (DPST).

Available for download

Stainless Steels for Automotive Applications – Hydrogen Embrittlement Testing for High Pressure Hydrogen Gas Using Different Methods

Product Number: 51323-19241-SG

Author: Ulf H. Kivisakk, Björn Bosbach, Emil Cederberg, Ulrika Borggren, Nian Zhou

Publication Date: 2023

$20.00

Today hydrogen for use as fuel for vehicles is getting more and more attention as an alternative to vehicles using fossil-based fuels. Hydrogen is used in both electric fuel cell cars and in heavy vehicles using direct combustion of hydrogen. Such vehicles require stainless tubing for transport of the hydrogen and for bosses to composite tanks in addition to tubing and fittings in hydrogen fueling stations.

Available for download

Steel based Bipolar Plates for Proton Exchange Water Electrolysis

Product Number: 51323-19236-SG

Author: Katie McCay, Corneliu Craciunescu, Sara Andrenacci, Andrea Kellenberger, Marit Stange, Mircea Dan, Thulile Khoza, Sigrid Lædre

Publication Date: 2023

$20.00

Water electrolysis is a process that uses electricity, potentially from renewable energy sources, to split water into hydrogen and oxygen. Among water electrolysis technologies, alkaline electrolysis is the most developed and commercially available, but PEM electrolysis is emerging as a more efficient solution. It presents several advantages, such as the possibility to operate at high pressure and high current density for production of hydrogen.

Available for download

Strain Hardened Austenitic Corrosion Resistant Alloys’ Susceptibility to Hydrogen Induced Stress Cracking

Product Number: 51323-19235-SG

Author: Amrinder P.S. Dhillon, Xu Lu, Roy Johnsen, Ida Westermann

Publication Date: 2023

$20.00

Several offshore field failures in recent years have been attributed to Hydrogen Induced Stress Cracking (HISC) of high strength, highly corrosion resistant Precipitation Hardened Nickel Alloys (PHNA’s) such as UNS N07716, UNS N07718 and UNS N07725.

Hence, HISC is a constant concern regarding subsea components subjected to high tensile stress, and the industry is searching for solutions to their technical needs: High strength corrosion resistant alloys (CRA’s) resistant to seawater (high Pitting Resistance Equivalent number (PREN)) but also resistant to HISC.

For PHNA’s, improved processing (chemical composition limits and processing temperatures) and improved quality control methods as well as refined acceptance criteria are all under consideration.

Available for download

Stray Current Interference Simulation and Mitigation Associated with Light Rail Transit (LRT) Systems and Adjacent Metallic Pipelines – A Case Study

Product Number: 51323-18926-SG

Author: Boshra Momen Nejad, Jeffrey Delorme, Brandon Miller

Publication Date: 2023

$20.00

During operation of DC rail transit systems, DC current will follow the path of least resistance when returning to the Traction Power Substations (TPSS) to complete the electrical circuit. If the track-to-earth resistance (resistance between the train rails and surrounding soil) is not sufficient, current can leak off the LRT track system into the surrounding soil. Metallic facilities such as pipelines in the soil offer lower resistance paths for the current while returning to the TPSS.

Products tagged with 'ampp annual conference + expo'

Association for Materials Protection and Performance