AMPP Store - Products tagged with 'corrosion monitoring'

Available for download

Challenges Of Mitigating AC Interference Risks In A 107 Km Multi-Pipeline Corridor

Product Number: 51322-17949-SG

Author: Wolfgang Fieltsch, Paul Murray

Publication Date: 2022

$20.00

This case study involves an NPS 36, 107 km long pipeline (Pipeline A) installed in 2016. The subject pipeline is collocated with an NPS 30 pipeline constructed in 1999 (Pipeline B), for the entire route, and two additional pipelines near the start of its route (Pipelines C and D), all owned by the same operator.

Available for download

Comprehensive Corrosion under Insulation (CUI) Management for Cryogenic Service: A Facility-Specific Approach with Broad Industry Implications

Product Number: 51324-21071-SG

Author: Abdullah M. Alratoee; Ricardo S. Costa; Meshary A. Al-Bahli; Faisal M. Al-Mutahhar; Mohamed A. Ahmed

Publication Date: 2024

$40.00

In the realm of corrosion management, corrosion under insulation (CUI) poses significant challenges, particularly for facilities operating in cryogenic service. A comprehensive approach to understanding and mitigating CUI risks is crucial for ensuring asset integrity, safety, and operational efficiency. This paper presents an in-depth case study of a natural gas liquids (NGL) fractionation facility, demonstrating the successful implementation of a holistic CUI management strategy applicable to a broader industry context. Notably, the facility has faced unique challenges, as some circuits have not been shut down or inspected for the past 40 years. The paper details the extensive work carried out, encompassing risk mapping, mitigation strategies, inspection planning and prioritization, and repair planning. By adopting a systematic approach, the study effectively identifies and addresses CUI risks in the facility's cryogenic service operations. The results of this research contribute to the existing body of knowledge on CUI management in cryogenic service, offering a recommended path forward for the industry to tackle CUI-related issues. By showcasing a comprehensive and adaptable approach, this paper holds great potential to foster increased safety, reliability, and efficiency in the corrosion industry, paving the way for future research and collaboration.

Available for download

CorrCompilation: Corrosion Failures for Pipelines

Product Number: 37640-E

ISBN: 978-1-57590-380-4

Author: Robert Pogue

Publication Date: 2018

$125.00

The goal of this compilation is to educate the reader through experiences and observations from real-world applications and to provide tools for the identification and remediation of pipeline corrosion issues before failure. Pipelines have been used to transport fuels since the 19th century. While there is no clear consensus of the total number of pipeline miles in use throughout the world, most agree that the U.S. has over 2.5 million mi of energy pipelines. This book provide tools for the identification and remediation of pipeline corrosion issues before failure.

2018 NACE e-book

Available for download

Correlating of Online Corrosion Monitoring (OCM) with in Line Inspection Data for Export Crude Pipeline - Case Study

Product Number: 51324-20624-SG

Author: Abeer Rashed; Akhil Jaithlya; Anwar Redha; Shibu Abraham

Publication Date: 2024

$40.00

Pipelines are one of the essential elements in the upstream oil and gas operation network. Transportation of the produced products to the end client is ensured through maintaining the pipeline integrity. Internal corrosion is one of the major problems that could directly affect pipeline integrity and, in severe cases, lead to failure. Different internal corrosion monitoring techniques are available to assess and evaluate fluid corrosivity and monitor it. Online Corrosion Monitoring (OCM) that uses corrosion coupons are widely utilized to measure the corrosion and pitting rate, in addition to fluid and bacteria analysis for fluid sample collected from cleaning pigging processes that qualitatively and quantitatively reflect the fluid corrosivity. Inline inspection (ILI) is a very sophisticated non-destructive inspection technique conducted for identifying pitting corrosion, erosion, cracks, and other types of pipeline defects. This paper presents a case study on correlates the Online Corrosion Monitoring (OCM) data, Wet chemistry analysis of the fluid, cleaning pigging samples, operational Data along with Inline inspection (ILI) data for one of the main and critical North Kuwait crude export pipeline. The paper's outcome could be utilized for implementing a good corrosion mitigation plan and prioritizing and following up on the action plans of the Crude pipelines.

Available for download

Corrosion Engineer's Reference Guide - Fourth Edition

Product Number: 37608-pdf

ISBN: 978-1-57590-450-4

Author: Robert Baboian

Publication Date: 2016

$170.00

MUST HAVE CLASSIC: The objective of the NACE Corrosion Engineer's Reference Book, published in 2016, is to provide scientists, engineers, technologists, and students with useful and important information and data on corrosion investigation and control.

This handbook starts out with a comprehensive glossary that includes standard terminology and acronyms related to corrosion. It also contains more than 325 tables, graphs, and charts.

2016 NACE, 570 pages

Available for download

Corrosion Management Improvements in Liquids-Rich Shale Play - Pipeline Internal Corrosion Mitigation Case Studies

Product Number: 51324-20990-SG

Author: Monica Fernandez; Chris Jeske; Robert Terry; Ruben Carrera

Publication Date: 2024

$40.00

This paper details the process followed to enhance the pipeline internal corrosion management during operational stage in a liquids-rich shale play, focusing on pipeline internal corrosion mitigation. The process involves several key steps, encompassing a thorough review of historical data (operational conditions, fluid chemistry, corrosion coupons, chemical treatments, pigging activities, inspection results, among others), meticulous data analysis, strategic scheduling, implementation of short-term, mid-term, and long-term actions, followed by periodic monitoring to evaluate barrier performance in conjunction with an inspection plan to confirm asset integrity and optimize resource utilization. The improvements have considered industry best practices, know-how, lessons learned, valuable insights gained from past failures, challenges encountered within upstream operations for corrosion and integrity activities execution, and the actions taken to overcome them.

Available for download

Corrosion Monitoring System in the Port of Miami Tunnel

Product Number: 51324-21171-SG

Author: Adrian Steele; Samanbar Permeh; Kingsley Lau

Publication Date: 2024

$40.00

The design of the PortMiami Tunnel (PMT) utilizes segmental reinforced concrete lining panels. Early corrosion initiation is expected to be mitigated by the specification of low permeability ternary-blend concrete and minimum three-inch clear cover, but there is uncertainty in the long-term corrosion and materials durability (particularly considering its ambitious 150 year design life) and uncertainty of the extent of possible loss of concrete integrity of the structure at extended times. Therefore, interest lies in continual long term corrosion monitoring of the tunnel panels. The objectives of this testing program are to provide information on the panels that may indicate possible early corrosion development in key areas of the tunnel and to provide field data to supplement laboratory testing to provide recommendations for best practices addressing corrosion prevention and mitigation for submerged structures. The findings from corrosion monitoring for over 10 years of service are presented.

Available for download

Corrosion Sensors Led In-Service Performance Assessment of Steel Pile Wrapping/Jacketing Systems on Marine Structures in Australia

Product Number: 51320-14511-SG

Author: W. Green, G. Will, J. Katen, A. Collison

Publication Date: 2020

$20.00

The use of corrosion sensors for remote monitoring of infrastructure assets has become more frequent in recent years. Corrosion sensors utilizing the electrical resistance (ER) method have been developed, in which the resistance of a test sample is used to infer thickness change and hence corrosion rate. ER corrosion sensors have been deployed on various structures including marine wharves, bridges and coal processing facilities. On some marine wharf structures and some marine coastal bridges the performance of jacketed petrolatum-based tape wrapping systems on steel piles has been assessed including on steel piles suffering from accelerated low water corrosion (ALWC) and microbiologically influenced corrosion (MIC). The paper provides some relevant discussion of the corrosion and its mechanisms prevalent to marine wharf and bridge steel piles in Eastern Australia, Southern Australia and Western Australia as well as the pile wrapping/jacketing systems installed and being performance monitored in-situ. Details are provided of the corrosion sensors. An assessment of the results obtained to-date for up to 3 years of in-situ exposure has been made.

Available for download

CP of Steel in Soil: Temporospatial pH and Oxygen Variation as a Function of Soil Porosity

Product Number: 51321-16313-SG

Author: Federico Martinelli/Ueli Angst

Publication Date: 2021

$20.00

Available for download

CUI Assessment Near Insulation Support Rings Using Pulsed Eddy Currents

Product Number: 51323-19031-SG

Author: Donald Picard, Olivier Bellavance, Charles Tremblay, Andréanne Potvin

Publication Date: 2023

$20.00

Pulsed Eddy Currents (PEC) is an electromagnetic inspection method for detecting thickness variations in carbon steel and cast iron through various insulation and/or protective components. It is also resilient to liftoff variations, making it a valuable technique for Corrosion Under Insulation (CUI) assessment. The technology is widely used in the energy and petrochemical industries to detect and estimate the extent of corrosion in insulated or fire-proofed components like pipes and tanks without removing the covering.

Available for download

Electrochemical Testing To Predict Corrosion Performance on Various Aluminum Alloys

Product Number: 51321-16292-SG

Author: Dr. Catherine A. Munson/Dr. Sjon Westre/Alex Westre

Publication Date: 2021

$20.00

Available for download

Evaluation Of Dead Leg Piping with Internal Corrosion at A Salt Dome Natural Gas Storage Facility

Product Number: 51323-19041-SG

Author: Leslie A. Ward, Len J. Krissa, Garry Matocha, Thomas Pickthall

Publication Date: 2023

$20.00

The essence of this paper is to talk about internal corrosion found in deadleg piping at the Enbridge Gas Transmission, & Midstream (GTM) Egan Hub Partners Storage Facility and especially how the corrosion was evaluated after the deadlegs were removed. The salt dome cavern storage facility is in south central Louisiana. The internal corrosion was found in the piping that comes from the storage caverns and goes through pressure reduction stations and then through dehydrations systems.

Products tagged with 'corrosion monitoring'

Association for Materials Protection and Performance