AMPP Store - Products tagged with 'corrosion control'

Available for download

Practical Application of Coating Systems in Wastewater Treatment Facilities

Product Number: 41206-232-SG

Author: Scott DeVinney

Publication Date: 2006

$20.00

Preservation of wastewater treatment assets and the evolution of the coating options required to mitigate the severity of the exposure environment, are giving coating contractors pause to examine alternative means of application. By expanding application versatility, the coating contractor will be able to compete across the range of preservation options.

Available for download

Preventing Corrosion under Insulation in Piping - Trends after Evaluating Digital Data from Thousands of Piping Circuits

Product Number: 51323-18871-SG

Author: Eddie Sanchez, Michael Townsend, Michael Nichols, Katherine Jonsson, Eric Sjerve, Ana Benz

Publication Date: 2023

$20.00

Extensive guidelines have been published for selecting where to search for corrosion under insulation (CUI). The guidelines are based on CUI failures and near misses. Piping CUI inspection programs collect the data outlined as relevant in specific company practices.

Available for download

Prevention and Control of Corrosion - It’s a Matter of Choice

Product Number: 41215-899-SG

Author: Roger Hamerlinck

Publication Date: 2015

$20.00

What would you say to someone if they accused you of intentionally accepting corrosion that led to damage or loss of military equipment, infrastructure and facilities or the injury, lost time, loss of lifer? The truth is, we do choose to accept corrosion and its negative consequences based on the tradeoffs/choices and limitations we are faced with. Scientists say that the average human makes thousands of decisions every day. Researchers at Cornell have found that the average human makes approximately 230 decisions a day on food alone.

Available for download

Process Development for Mechanistic Corrosion Models: Building, Validating, and Leveraging for Robust Outcomes

Product Number: 51324-20871-SG

Author: Daniel Fingas; Scott McKelvey; Keith Parker

Publication Date: 2024

$40.00

Computer modelling and simulation holds the promise of improved outcomes and more efficient resource allocation. However, attaining these results requires careful consideration of model inputs, robust mechanistic or probabilistic characterizations, delineation of assumptions, validation of outputs versus available data, and the appropriate use of model results. Formalizing these steps is necessary to ensure that checks and balances are implemented transparently and can be audited if necessary. A process has been developed by which a mechanistic corrosion model can be built, validated, and used. The most critical aspect of the process is the validation, by which the model can be tested and shown to be accurate within an acceptable tolerance. Nevertheless, the clear definition of the overall process allows the model to be properly understood, including the necessary context of inputs, assumptions, limitations, and uncertainty. Thus, the process allows the model output to be relied upon for managing risk and maintaining system integrity by both operators and regulators.

Available for download

Reactive to Proactive Transformation - A New Paradigm in Corrosion Management

Product Number: 51323-19106-SG

Author: Faisal M. Al-Mutahhar, Ibrahim A. Albrahim, Abdullah M. Alratoee, Rakan A. Al-Shebil, Ayman A. Alabdullatif, Ricardo S. Costa, Yousef A. Aldossary, Muntathir M. Al-Jumaah

Publication Date: 2023

$20.00

Maximizing asset uptime and reducing maintenance costs are essential in any process facility. Effective corrosion management is a key driver to achieving these goals. Corrosion management involves monitoring and controlling corrosion to maintain the integrity of equipment and improve availability and safety.

Available for download

Refinement of Pitting Factor Basis to Evaluate Minimum Nitrite Requirement in Dilute Waste Chemistries

Product Number: 51324-20801-SG

Author: Joshua T. Boerstler; Keisha B. Martin; Bruce J. Wiersma; Andrea N. Bridges

Publication Date: 2024

$40.00

Considering that chloride concentrations are an order of magnitude lower at SRS than the maximum chloride previously tested to evaluate pitting susceptibility of carbon steel, it has been proposed that the Pitting Factor methodology be refined to determine if a reduction in the minimum nitrite requirement is warranted in more dilute solutions and those with chloride concentrations more indicative of waste tank chemistries at SRS. Through the use of cyclic potentiodynamic polarization, the susceptibility of A537 carbon steel to pitting corrosion was evaluated. The Pitting Factor was shown to accurately predict pitting susceptibility throughout the chemistry envelope evaluated. In addition, it was shown that nitrite is not required for inhibition of pitting corrosion in tank conditions with chloride concentrations observed at SRS and up to 4 M nitrate. Based upon these findings, new control limits were proposed that removed the minimum nitrite requirement within the chemistry envelope evaluated up to 50 °C.

Available for download

Remote Monitoring Survey

Product Number: 51323-19260-SG

Author: Andreas Junker Olesen, Lars Vendelbo Nielsen

Publication Date: 2023

$20.00

Remote monitoring is becoming an increasingly more accepted way of gathering data from test stations. Not only because the value of having continuous data often exceeds that of performing spot-wise measurements in time, but also because the cost of collecting data manually is getting higher. Still, regulations require annual surveys to document the safe operation of pipeline CP systems.

Available for download

Research On Cluster Well Group Casing Cathodic Protection For Field Test And Optimization Of Anode Bed

Product Number: 51322-17724-SG

Author: Dawei Zhuang, Qian Zhao, Yanxia Du, Xiaoyong Wang, Qiongwei Li

Publication Date: 2022

$20.00

Deep well casing is an important part of oilfield production. In the long service life of well casing, corrosion can result in wall thinning and even perforation of the casing due to contacting with soil, water and other naturally occurring substances within the formation. The most economic and effective method to decrease corrosion of well casing is cathodic protection (CP). However, the vertical depth of casing is several kilometers, and CP current requirements of casing in different layers are quite different. At the same time, the conductivity of different formations will affect the distribution of CP current.

Available for download

RP-01-69-1972 "Control of External Corrosion on Underground or Submerged Metallic Piping Systems"

Product Number: 21001-1972

Publication Date: 1972

$179.00

DOWNLOADABLE HISTORICAL DOCUMENT. The purpose of thie Recommended Practice is to present procedures and practices for achieving effective control of external corrosion on buried or submerged metallic piping systems.

Available for download

RP0169-2002 (Chinese), Control of External Corrosion on Underground or Submerged Metallic Piping Systems

Product Number: 21108-SG

ISBN: 1-57590-035-1

Publication Date: 2002

$179.00

埋地或水下金属管线系统外腐蚀控制的推荐作法

Achieving effective control of external corrosion on buried or submerged metallic piping systems. Design. Coatings. Cathodic protection. Installation. Interference currents. Costs.

Available for download

RP0169-2002-SG (Chinese), Control of External Corrosion on Underground or Submerged Metallic Piping Systems

Product Number: RP0169-1972

ISBN: 1-57590-035-1

Publication Date: 1972

$179.00

Standard for achieving effective control of external corrosion on buried or submerged metallic piping systems or other buried metallic structures. System design. Coatings. Cathodic protection criteria & installation. Control of interference currents. HISTORICAL DOCUMENT

Available for download

RP0176-2003 (Chinese), Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production

Product Number: 21118-SG

ISBN: 1-57590-170-6

Publication Date: 2003

$179.00

海上钢质固定石油生产构筑物腐蚀控制的推荐做法

DOWNLOADABLE HISTORICAL DOCUMENT. Corrosion control in the submerged zone, the splash zone, and the atmospheric zone of fixed offshore structures associated with petroleum production.

Products tagged with 'corrosion control'

Association for Materials Protection and Performance