AMPP Store - Process Industries

Available for download

Evaluation of 316L and 2205 Steels Under Flow Effects in Caustic Environments

Product Number: 51317--9158-SG

ISBN: 9158 2017 CP

Author: Bedi Aydin Baykal

Publication Date: 2017

$20.00

To better understand the mechanism of erosion-corrosion, electrochemical tests were performed on UNS G10180, UNS S31603 and UNS S32205, used in the construction of pulp/paper machinery components exposed to caustic environments.

Available for download

Kinetic and Morphological Investigation of Calcium Sulfate Dihydrate (gypsum) Scale Formation on Heat Exchanger Surfaces in the Presence of Inhibitors

Product Number: 51317--9020-SG

ISBN: 9020 2017 CP

Author: Zahid Amjad

Publication Date: 2017

$20.00

Gypsum scale formation takes place directly on the surface of heat exchanger without bulk or spontaneous precipitation in the reaction cell. Polymeric and non-polymeric inhibitors have been examined for their effects on the rate of scale formation.

Available for download

Material-Biodiesel Compatibility – Survey of Industry Experience

Product Number: 51317--9434-SG

ISBN: 9434 2017 CP

Author: Li Yan

Publication Date: 2017

$20.00

Two surveys were conducted in 2011 to understand the industry knowledge and experience with respect to the use of biodiesel. This paper summarizes the salient features from these surveys.

Available for download

Monitoring Evaluating and Control of Corrosion and Scaling in Higher Pressure Industrial Boilers

Product Number: 51317--8988-SG

ISBN: 8988 2017 CP

Author: John Kelly

Publication Date: 2017

$20.00

The author has utilized two types of instruments in conducting hydrogen studies. Hydrogen analyzers are used extensively in both the laboratory and in industrial steam generating plants. This is a collection of five case studies.

Available for download

NACE SP0109-2019, Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines

Product Number: 21143-SG

Publication Date: 2019

$179.00

HISTORICAL DOCUMENT. This Standard Practice provides the most current technology and industry practices for material requirements and the use of tape coatings for external mainline coating, coating repair, coating rehabilitation, and coating weld joints on buried metal pipelines.

Available for download

NACE SP0292-2018, Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

Product Number: 21054-SG

Publication Date: 2018

$179.00

HISTORICAL DOCUMENT.

This standard is intended for use by those specifying and installing thin metallic linings (nickel alloy, stainless steel, and titanium) in air pollution control and other process equipment subject to corrosive conditions.

Available for download

NACE SP0292-2024, Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

Product Number: NACE SP0292-2024

$109.00

This standard practice provides technical and quality assurance guidelines for handling and installing nickel alloy, stainless steel, and titanium linings in air pollution control equipment (e.g., FGD systems, ducts, and stacks). The concepts and guidance included in this standard may also be useful in other process industries, but may require modification to meet the requirements of a particular process. This standard is intended to be a basis for preparation of a specification to be agreed on by contracting parties for the installation of wallpaper lining in air pollution control and other process equipment. It is the responsibility of users of this standard to determine the suitability of specific procedures, metals, and alloys for particular applications.

Available for download

NACE TM0169-2021/ASTM G31-21, Standard Guide for Laboratory Immersion Corrosion Testing of Metals

Product Number: 21200-SG

Publication Date: 2021

$109.00

This guide covers and describes the factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include apparatus, sampling, test specimen, test conditions (test solution composition, temperature, gas sparging, fluid motion, solution volume, method of supporting test specimens, duration of test), methods of cleaning test specimens, imterpretation of results, and calulation of corrosion rates. This guide also emplasizes the importance of recording all pertinent data and provides a checklist for reporting test data.

Available for download

NACE TM0498-2023, Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture

Product Number: NACE TM0498-2023

$109.00

This AMPP standard establishes a standard test procedure for pack bed carburization of alloys used for ethylene manufacture. The pack bed carburization procedure is specified in this standard because it is simple to perform. The test specimen geometry chosen reflects the intent of the procedure to be used for evaluation of carburization of furnace tube alloys intended for ethylene manufacture.

Available for download

NACE TM21431-2020, Test Methods to Evaluate Thermal Properties and Performance of Insulative Coatings

Product Number: 21431-2020

Publication Date: 2020

$179.00

HISTORICAL DOCUMENT. The purpose of this NACE International standard test method is to specify test methods and test conditions used to evaluate thermal properties, insulation values, and performance/integrity before and after thermal aging of insulative coatings. Testing for corrosion resistance is not included in this test method.

Available for download

NACE TR02203-ICRI Technical Guideline 710.1-SSPC-TR 5-2023

Product Number: NACE TR02203-ICRI Technical Guideline 710.1-SSPC-TR 5-2023

Publication Date: 2023

$109.00

This technical report provides information on the design, installation, and maintenance of protective polymer flooring systems that are applied and directly bonded to concrete. This document does not detail protective polymer flooring systems installed and bonded to other substrates. Installation of polymer coating systems to exterior applications and special service conditions, such as parking decks, balconies, and swimming pool decks, requires additional consideration with respect to the concrete composition and environmental conditions. These application areas are not specifically addressed in this report. This report is intended for use by manufacturers, specifiers, applicators, and facility owners who specify protective polymer flooring systems for concrete.

Available for download

NACE TR5A171-2022, Materials for Storing and Handling Commercial Grades of Aqueous Hydrofluoric Acid and Anhydrous Hydrogen Fluoride

Product Number: NACE TR5A171-2022

Publication Date: 2022

$109.00

Note: This document was originally published with errors in Table B1 , page 26. These identified errors are corrected. Errata sheet is included.

This technical report presents general information on materials commonly used for storing and handling commercial grades of aqueous hydrofluoric acid (AqHF) and anhydrous hydrogen fluoride (AHF). Some materials generally avoided are also discussed. This report is intended for end users, designers, and suppliers of equipment for use with AqHF and AHF. These include, among others, workers in process industry plants, engineering and construction designers, and suppliers of equipment such as pumps, valves, and hoses. This information is useful for initial design and for cost estimates of equipment to handle most commercial AqHF and AHF. The report addresses AqHF and AHF purchased to normal commercial quality that do not contain impurities liable to affect their inherent corrosion characteristics. Testing in the service environment typically indicates a material’s suitability for use with AqHF and AHF. This report does not include all materials that might be resistant and is not intended to limit the consideration and testing of other materials.

Process Industries

Association for Materials Protection and Performance