Menu
Search
Filters
Close
Menu

Celebrate World Corrosion Awareness Day with 20% off eCourses and eBooks with code WCAD2024 at checkout!

Search and Filter

Toggle Open/Closed
View as
Display per page
1391 total products found.
Picture for Corrosion Investigations of Copper Alloys and Cast Stainless Steel Used for Drinking Water Applications
Available for download

Corrosion Investigations of Copper Alloys and Cast Stainless Steel Used for Drinking Water Applications

Product Number: 51324-20723-SG
Author: Luca Blanka Boncz; Jens Lykke Sørensen; Lotte Holmegaard; Morten Stendahl Jellesen
Publication Date: 2024
$40.00
Brass alloys are considered corrosion-resistant in potable water. However, chloride, disinfectants, and high flow rates were reported to weaken pipes, leading to leaks and damage. The degradation of copper alloys causes concern as metal ion release may affect water taste and human health in high concentrations. Therefore, materials with improved flow corrosion properties and increased corrosion resistance are needed. Failure investigations were performed on C52100 brass domestic water flowmeters by visual inspection, microstructural analysis with scanning electron microscope energy dispersive X-ray spectroscopy (SEM-EDS), and X-ray diffraction (XRD). The failure is mostly initiated by high local flow rates causing erosion corrosion attacks with dezincification. The corrosion behavior of C52100 (phosphor bronze), C89520 (Se-Bi brass), and S31600 (stainless steel) was investigated and compared to C27453 (brass) in drinking water with varying contents of chloride, ammonia, and chlorine by potentiodynamic polarization curves and long-term immersion tests. Furthermore, flowmeters (made of C27453 and C89520) were installed in a flow test setup to investigate flow induced conditions in a laboratory environment with aggressive drinking water. Immersion tests, flow tests, and potentiodynamic investigations show that brass corrodes at a higher rate than bronze, Se-Bi brass, and stainless steel in such environments.
Fundamentals of Making Good Decisions in Coatings Selection: Interpreting the Hidden Aspects of Accelerated Test Results
Available for download

Fundamentals of Making Good Decisions in Coatings Selection: Interpreting the Hidden Aspects of Accelerated Test Results

Product Number: 41212-722-SG
Author: Allen Zielnik
Publication Date: 2012
$20.00

When selecting among decorative or functional/protective architectural coatings many factors need to be considered; one key aspect is how long the product will last (weather). A “ten year” warranty is neither a guarantee of total replacement cost nor that all “ten year” products are created equal. 
Picture for 30105 Electrical Isolation / Cont
Available for download

NACE Publication 30105-2005-SG, Electrical Isolation/Continuity and Coating Issues for Offshore Pipeline Cathodic Protection Systems

Product Number: 24228-SG
ISBN: NACE Pub 30105
$109.00

Electrical isolation/continuity issues and coating issues to consider when designing and operating offshore pipeline cathodic protection (CP) systems.  For owners, engineers, contractors, and operators. 
Picture for Toward Objective Evaluation Of FRP Corrosion Barrier Condition
Available for download

Toward Objective Evaluation Of FRP Corrosion Barrier Condition

Product Number: 51322-17669-SG
Author: Geoff Clarkson
Publication Date: 2022
$20.00

Fiber reinforced polymer (FRP) and other polymeric materials are used in many ways to reduce and manage corrosion damage for industrial, infrastructure and municipal applications. It is common practice to use the term “resin” for polymers in these materials. This paper uses polymer interchangeably with resin. This paper will also only consider glass fiber reinforcements.
Education on the Differences Between Wet Abrasion Blasting and Water Jetting
Available for download

Education on the Differences Between Wet Abrasion Blasting and Water Jetting

Product Number: 41214-823-SG
Author: Duane T. Hough
Publication Date: 2014
$20.00

There is a wide gulf in the industry between the capabilities of water jetting and wet abrasive blast equipment capabilities and the perception of their capabilities. The misinformation frequently leads to miscommunication between the various parties involved in projects where the equipment and associated standards are used. 
Regulatory Update: Current and Emerging Trends in Occupational and Environmental Health
Available for download

Regulatory Update: Current and Emerging Trends in Occupational and Environmental Health

Product Number: 41208-423-SG
Author: Alison B. Kaelin
Publication Date: 2008
$20.00

This paper takes a look at emerging environmental, health and safety issues that may impact painting contactors and facility owners. Specific topics include OSHA’s hexavalent chromium standard, recent rulings related to multi-employer worksite policy and OSHA’s use of threshold limit values (TLVs®). 
Picture for NACE Publication 31215
Available for download

NACE Publication 31215-2014, “Laboratory Evaluation of Corrosion Inhibitors Used in the Oil and Gas Industry

Product Number: 24259-SG
Publication Date: 2014
$179.00

HISTORICAL DOCUMENT. Evaluating corrosion inhibitors used in the oil and gas industry. Describes types of inhibitors and how properties are evaluated. Provides 17 inhibitor properties that are evaluated prior to field application.
Picture for An Integrated Probabilistic Approach to Predicting the Occurrence of Atmospheric Stress Corrosion Cracking of Dry Storage Canisters
Available for download

An Integrated Probabilistic Approach to Predicting the Occurrence of Atmospheric Stress Corrosion Cracking of Dry Storage Canisters

Product Number: 51323-18893-SG
Author: Aaron J. Stenta, Brandon R. Rollins, Gerald Young, Narasi Sridhar, Ramgopal Thodla
Publication Date: 2023
$20.00

Spent nuclear fuel (SNF) is currently stored in stainless steel dry storage canisters (DSCs) contained within concrete cask systems with passive ambient air cooling. These systems are emplaced, either horizontally or vertically, at independent spent fuel storage installations (ISFSIs), located at utility reactor sites. The ambient air introduces moisture, aerosolized salt particles, and dust to the canister surfaces. The composition of the aerosols depends on geographical factors, such as proximity to the ocean,
industrial area, rural areas, and transportation corridors that use road salt for winterization.
Picture for 11248 Choosing Better API RP 14E C Factors for Practical Oilfield Implementation
Available for download

11248 Choosing Better API RP 14E C Factors for Practical Oilfield Implementation

Product Number: 51300-11248-SG
ISBN: 2011 11248 CP
Author: Ronnie Russell, Hang Nguyen, and Kai Sun
Publication Date: 2011
$20.00

A review of erosion guidelines for allowable production rates is presented and improvements in choosing American Petroleum Institute Recommended Practice (API RP) 14E C-factors are proposed to mitigate erosion that permits higher oil production rates yet keeps erosion rates at acceptable levels.
Picture for SP0273-2016
Available for download

SP0273-2016-SG, Handling and Proper Usage of Inhibited Oilfield Acids

Product Number: 21009-SG
ISBN: 1-57590-122-6
Publication Date: 2016
$109.00

Methods for the handling and use of inhibited hydrochloric acid for oilfield applications. Minimizing acid corrosion.  Preparation of the well & acid solution. Solution pumping/injection. Handling return fluids.
Picture for Abrasive Blasted Surface Preparation – Does the Pipeline Coating Industry Really Understand it?
Available for download

51318-11245-Abrasive Blasted Surface Preparation – Does the Pipeline Coating Industry Really Understand it?

Product Number: 51318-11245-SG
Author: Shiwei William Guan
Publication Date: 2018
$20.00

Three recent international pipeline projects illustrate that the typical surface profile height and abrasive blast cleaning requirements in today’s coating standards and specifications have not been sufficient to define the adequate level of the abrasive blasting.
Picture for SSPC-TR 2/NACE TR6G198-2023, Wet Abrasive Blast Cleaning
Available for download

SSPC-TR 2/NACE TR6G198-2023, Wet Abrasive Blast Cleaning

Product Number: SSPC-TR 2/NACE TR6G198-2023
Publication Date: 2023
$109.00

This technical report discusses equipment, procedures, materials, and the resulting substrate conditions involved in a variety of WAB cleaning methods currently available for commercial use. It also discusses the effect that the water present with these wet cleaning methods has on achieving the defined degree of cleaning of steel surfaces in accordance with the wet abrasive blast cleaning standards found in the list of Referenced Standards and Other Consensus Documents. It is intended for use primarily by specifiers, owners, painting contractors, inspectors, and others involved in surface preparation of industrial structures.

This report was originally issued in 1998 and has been revised to include additional configurations of equipment setup as well as current (2022) developments in the design of wet abrasive blast cleaning systems and nozzles. This TR provides a foundation to assist users to determine the quantity and quality of water, abrasive, and air.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support