Menu
Search
Filters
Close
Menu

Search and Filter

Toggle Open/Closed
View as
Display per page
115 total products found where category is "NACE Standards" and industry is "Oil and Gas Production".
Picture for NACE SP0575-2022, Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels
Available for download

NACE SP0575-2022, Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels

Product Number: NACE SP0575-2022
Publication Date: 2022
$109.00

This standard provides a general guide for the application of effective cathodic protection (CP) to all types of oil-treating vessels containing a free water phase (the electrolyte). It is intended to be used by facility owners, contractors, inspectors, vessels equipment specialists, CP system designers, manufacturers, and others concerned with corrosion mitigation by using cathodic protection systems. The procedures in this standard may best be applied under the direction of a corrosion engineer and by persons with experience and knowledge of the design, installation, operation, maintenance, and control of corrosion protection in the oil-treating vessels containing the electrolyte.

 

Coatings and materials are discussed in this document in conjunction with the cathodic protection design, as the coating is a major factor when designing a cathodic protection system.
Picture for MR0174-2007, Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants
Available for download

MR0174-HD1995-SG Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants-HD1995

Product Number: 21300-HD1995
Author: NACE
Publication Date: 1995
$179.00

Corrosion inhibitors to provide protection of sucker-rod threads and box cavities against corrosive well fluids and to protect the threads from galling. Inhibited lubricants and tests to select. Historical Document 1995
Picture for MR0174-Recommendations for Selecting Inhibitors for Use as Sucker Rod Thread Lubricants-HD1988
Available for download

MR0174-1988, Recommendations for Selecting Inhibitors for Use as Sucker Rod Thread Lubricants

Product Number: 53017-HD1988
Author: NACE
Publication Date: 1988
$179.00

Control of down-hole corrosion in and around sucker rod threads.  Selection of lubricant  and use of corrosion inhibitors against the effects of corrosive well fluids. Historical Document 1988
Picture for TM0184-Accelerated Test Procedures for Screeening Atmospheric Surface Coating Systems for Offshore Platforms and Equipment-HD1988
Available for download

TM0184-1988, Accelerated Test Procedures for Screeening Atmospheric Surface Coating Systems for Offshore Platforms and Equipment

Product Number: 53049-HD1988
Author: NACE
Publication Date: 1988
$179.00

Tests to evaluate atmospheric surface coatings…(1) atmospheric exposure…(2) coating properties…(3) accelerated tests Historical Document 1988
Picture for 1D196, Laboratory Test Methods for Evaluating Oilfield Corrosion Inhibitors
Available for download

1D196, Laboratory Test Methods for Evaluating Oilfield Corrosion Inhibitors

Product Number: 24192-SG
Publication Date: 1996
$179.00

HISTORICAL DOCUMENT. This Technical Committee Report establishes the pertinent parameters to be observed and/or controlled during laboratory and field evaluation of corrosion inhibitors for the purpose of establishing a common baseline for the comparison of the results from such evaluations.
Picture for NACE SP0775-2023, Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Hydrocarbon Operations
Available for download

NACE SP0775-2023, Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Hydrocarbon Operations

Product Number: NACE SP0775-2023
Publication Date: 2023
$109.00

This standard is presented for the use of metallic corrosion coupons in hydrocarbon production and processing facilities, including but not limited to drilling, production, and transportation operations on land, onshore and offshore. Hydrocarbon operations handle fluids including but not limited to oil, water, gas, condensate, and drilling fluids.
MR0175-1993, Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
Available for download

MR0175-1993, Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment

Product Number: 53024-HD1993
ISBN: MR0175-93
Author: NACE
Publication Date: 1993
$179.00

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in H2S-bearing hydrocarbon service. Historical Document 1993
Picture for TR3T199-2020, Techniques for Monitoring and Measuring Corrosion and Related Parameters in Field Applications
Available for download

TR3T199-2020, Techniques for Monitoring and Measuring Corrosion and Related Parameters in Field Applications

Product Number: TR3T199-2020
Publication Date: 2020
$109.00

Revised in 2020!  Assessment of corrosion in the field is complex because of the variety of applications, process conditions, and fluid phases that exist in industrial plants where corrosion occurs.  A wide range of direct and indirect measurement techniques is available, but each technique has its strengths and weaknesses.  In some applications, certain techniques cannot be used.  Some techniques can be used online, while others are used off-line.  Commonly, more than one technique is used so the weaknesses of one are compensated for by the strengths of another.  In other cases, a combination of different techniques can be synergistic, such as process sampling along with detection of corrosion upset.

 

The purpose of this technical committee report is to analyze the various techniques with respect to their benefits and limitations across the broad spectrum of industries in which they are used.

 

This revision incorporates Guided Wave Monitoring (GWM), On-Line Gas Chromatography (GC), and Acoustic Solid Detection (ASD) techniques and updates references to NACE standards.
Picture for TM029815
Available for download

TM0298-2015-SG “Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments”

Product Number: 21233-SG
ISBN: 1-57590-061-0
Publication Date: 2015
$109.00

Evaluate the relative resistance of fiber-reinforced plastic (FRP) pipe and tubulars to specific oilfield environments by comparison of tensile strength before and after exposure.  Reagents. Specimens. Equipment.
Picture for NACE SP0116-2022, Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines
Available for download

NACE SP0116-2022, Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines

Product Number: NACE SP0116-2022
Publication Date: 2022
$109.00

This standard practice outlines a methodology to assess pipeline integrity because of the threat internal corrosion in on- shore and offshore pipelines and other piping systems that normally carry multiphase fluids (gas, water, and oil) termed multiphase flow internal corrosion direct assessment (MP-ICDA). Liquid separators (drips), compressing stations, vessels, and other equipment not related to pipelines are not included in this standard. This standard applies to pipelines, and piping systems both onshore and offshore, containing carbon dioxide (CO2), hydrogen sulfide (H2S), oxygen (O2), and other corrosive species. Additionally, this standard applies to pipelines that continuously contain a liquid phase (water and condensate and/or oil and/or petroleum compounds), a possible solids content of various mineral scales, biofilms, or corrosion product compounds, and a continuous gas phase with fluid conditions that are not specifically covered by NACE SP0110 for wet gas internal corrosion direct assessment (WG-ICDA). Additionally, solids may be included as a phase by itself and may also be included in multiphase flow analysis of fluid streams
Picture for SP0499-2012
Available for download

NACE SP0499-2012 "Corrosion Control and Monitoring in Seawater Injection Systems"

Product Number: 21237-SG
Publication Date: 2012
$179.00

HISTORICAL DOCUMENT. For corrosion engineers and others involved in corrosion control of seawater injection systems. Controlling and monitoring for corrosion, bacteria, and water quality.  Equipment and practices.
Picture for NACE TM21423-2023, Determination of Substrate and Surface Temperature Limits for Insulative Coatings Used for Personnel Protection
Available for download

NACE TM21423-2023, Determination of Substrate and Surface Temperature Limits for Insulative Coatings Used for Personnel Protection

Product Number: NACE TM21423-2023
Publication Date: 2023
$109.00

The purpose of this AMPP test method is to standardize the testing methods and conditions used to determine the substrate and surface temperature limits for different thicknesses of insulative coatings used for personnel protection to be in compliance with ASTM C1055. The temperature limits determined when using this test method are specific for each coating tested at a particular thickness and substrate temperature. A standardized test method can validate the temperature limits of a coating used for personnel protection and enable direct comparison of its performance to other commercially available coatings. This test method is intended for use by facility owners, engineers, health and safety specialists, coatings manufacturers, and other interested parties.

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support